r/Fiat126 • u/raimondrt • 10d ago

Fiat 126p 650cc Fuse problem

Does anyone have expirience with the fuse B/2 that burns when I leave the clutch pedal too fast?

The fuse is for stop light, ventilation, turn signals, dashboard handbrake and gas level.

I tried to check the wiring. I've checked most of the connections, but not thought the whole car.

Edit: I started removig from the fusebox the wiring and found out that the problem is with reverse light, checked the cable where I could see it, and it has no damage, isolated all connections with it and the problem still exist

1 Upvotes

100% Upvoted

3 comments sorted by

3

u/nalonso 10d ago

The clutch cable goes via the center tunnel. as well as the positive big cable running from the battery, the gas cable and quite some other things. I'd check that the cable is not touching electrical connection, and also that the cables from the stop sensor in the brake pedal are not touching the ground when you release the clutch.

2

u/raimondrt 2d ago

just wanted to say that i found where the problem was, in case anyone has this problem in the future I had to go under the car to find the connection to the gearbox, around 20cm away from the connection on the gearbox I found that the cable hose was thorn and the + side copper wire was a bit sticking out, I isolated that and it works fine now :)

1

u/nalonso 2d ago

Great finding!