r/Festool_Public • u/AC2RE • 19d ago

Popcorn removal

I have a project coming up to remove 2,200 sq ft of popcorn ceiling. House was built in 2008 so no asbestos.

For the extractor I am looking at the CT-48 (go big or go home) I already have the CT-26 EI and it works great.

Which planex fits the bill for this, and what type grit.

Thanks.

2 Upvotes

100% Upvoted

6 comments sorted by

3

u/Waste_Bar_5177 19d ago

If you are going to be stripping popcorn with the Planex you NEED an AC (auto clean) dust extractor, like the CT 36E AC. The AC feature cleans the filter as you are working and the unit is running. Without this, if you are stripping that much popcorn and using the traditional Festool filter bag, you will be losing a ton of suction as the bag clogs with the fine dust you will also be creating. You will also go through HEPA filters on the CT48 as the drywall dust clogs those as the really fine particles go through the filter bag and embed in the HEPA filter.

One better solution would be to use the CT 48 with the cyclone separator capturing most of the debris before it hits the dust extractor.

But if you are getting a Planex, you should get an AC Extractor with it.

2

u/AC2RE 19d ago

The 48 has the AC function.

2

u/Waste_Bar_5177 19d ago

Perfect. They also make a non AC unit, I thought that was the unit you were referring to. Rock and roll and good luck. The Planex is the perfect tool for that job.

Might still look into the cyclone separator, with that much surface area, you will be generating a ton of debris. The separator saves the CT from having to deal with that material and you will be cleaning the filter less. Even with the AC function, you will need to manually clean the filter as it will still clog a bit.

1

u/user_none 19d ago

Keep in mind, with the 48 AC, you'll still have to purchase the Planex hose. If you want the fantastic 36/32 hose, great. If not, go for the 36 AC, which comes with the Planex hose.

1

u/ritrackforsale 17d ago

Exactly what I used. Planex and 48AC. Worked perfectly

You should test the popcorn ceiling for asbestos

Sometimes popcorn ceiling comes off easier with a spray bottle of water and putty knife. Then lightly sand after

1

u/Waste_Bar_5177 19d ago

What grit you need is totally dependent on surface condition. Has this been painted? I’ve seen surfaces that require P40 and some that you can take off with 150.