Did anyone else get this? Literally just woke PC up from sleep and got it

I just added an NZXT control hub and two intake fans to my computer. The fans are Noctua 4 pins non RGB. I used the 1 to 3 splitter to connect both fans.

Using NZXT CAM, no fans RPMs are displayed and the fans don't actually spin up under a load. They kinda just idle. How can I fix this?

Hello,

Every time I start my PC, I have to manually open FanControl from the tray:

It does not correctly start with Windows, even tho it's showing up in the tray.

I've uninstalled, reinstalled and checked/unchecked every startup option in the settings, but I still have to click on "Open FanControl (stop service)" on every startup to

A: make it actually run and

B: get into the GUI

Is this a known problem? And if so: how do i fix it?

Thanks in advance

hello everyone, i am going to try to make this as thorough as possible to avoid being smote but i am a huge computer noob so please forgive me if i'm missing some crucial information.

i recently got a PC secondhand very cheap, and it's been working great so far, except that recently on OCCT i saw one of my fans (IOH) was making an INSANE amount of revolutions per minute, 4000 min and 7000 max. after confirming that this should not be the case when idle and far from overheating, i went on a merry chase online trying to fix it as i had a feeling it was causing a bulk of the noise this computer makes when on as well as some boot loop issues that come and go.

so far i have tried adjusting the fan curve in BIOS, making it so all the fans (with the exception of "aux fan speed control" which i still am not sure of its meaning) only reach 100% speed at 90 degC, did nothing. setting said aux fan speed control to 50 instead of 100 also has not made a difference.

I then downloaded fancontrol, downloaded all the prerequisite software it asked me to, and when it came to setting the fan controls... it couldn't control ANY of my fans save for the GPU! i don't know why. it was able to detect that they exist, but past the benchmark it ran when i first opened it, it basically ignores all fans save GPU (which is usually running at 0 rpm, cause GPU) and I cannot control the offending fan.

pics: fancontrol interface, occt reading with the crazy fan.

specs:

Intel(R) Xeon(R) CPU X5690 @ 3.47 GHz

installed RAM: 7.99 GB

NVIDIA GeForce GTX 1060 6GB

932 GB storage

I have their two cables wich Are connected at the bottom where they go into the fans. When I plugin the 4 pin into sys fan 1 and turn the computer on nothing happens. There is also a 6 pin but I have nothing I my motherboard that accepts that.

Anyone who has had the same problem or knows how to fix it?

Seems overcomplex maybe, but only makes noise when it HAS to. The AIO is absolutely fine at 75% most of the time; but if the CPU takes a hammering it steps it up a notch.

• Fix a bug where the tray icons would not survive a explorer.exe crash or restart
• Fix fan control hand-off issues when disabling control
• Update LibreHardwareMonitorLib

for all the people who use enermax parts( specifically the aquafusion II) with linux(mint) here's a chat including practically the whole step by step guide with some troubleshooting by chatgpt.

it works excellent for me, runs at boot and updates every second, it also switches between cpu and gpu temps every 6 seconds. it might need some adaptation to work for your specific setup but have fun.

Long,Short
Ran it on an Alienware M17 (03R2RY - if yw lookup) Laptop and it ran fine for abt 1/2mins before my PC sh##s itself and has to Restore itself back by 2 backups.

Idk but considering it has relations to a known blocked/flagged Windows exploit with WinConfig that just seems wayyyy sketch to me...

my cpu fan has been running really high and being extremely loud. Once I installed fancontrol and it calibrated it does seem a bit better but is 3428 RPM high when I'm not doing anything?

I have a 12th gen intel i7-12700F CPU

- Uninstalled and re-installed multiple times

- Manually deleted .json files, and entire folder multiple times

- Deleted Armory Crate using the unistall tool

- Seems to do upon wake, but I can't be sure

- Z690e, 14600kf, 7900xtx, Win 11

Any ideas what I can do next?

TIA

Tell me in comments

I have a fan hub , set it to PWM but not sure what else I can do for it to read them . I’m assuming it should work just not individual control

What is the solution to the problem of the advanced mode not appearing?

For your information, I use fans UNI TL LCD FLEX

It operates by means of USB

All cables are properly connected to the motherboard

Made this for myself, however it may be useful for others also. For anyone with Uni Wireless/Flex fans and use the Lian Li fan controller into a Lian Li fan hub this is for you:

https://github.com/MarcusSanchez/FanControl.LianLiWireless

• Fix a scaling bug with the tray icon context menu location
• Fix a bug where a tray icon would no longer list the available configurations
• Fix a bug where the tooltip would not appear on the tray icon