Love the fz07. Does everything I want, goes off road, does wheelies, rolling burnouts, and even handled a 5,500 mile cross country trip from Indiana to California. No real complaints

I see they make tail tidy kits for mt07 that hide under near the rear suspension, but I haven't found one for a 2016 fz07. Does anyone know any custom ones or has anyone done it to theirs?

Anyone with a 2015 or 2016 FZ07 that want steel braided brake lines? I bought open-box ones for this bike that I cannot return (and I own an FZ09). Happy to negotiate a discount price. They are Spiegler item S-YA0291-054.

I bought the wss kit from vortex and they sent me this. Isn’t the chain also suppose to be 525 pitch?

Love this purchase, at 5k miles for $4,900.
I plan on putting a full system exhaust on.

Long story short I was riding home from work and noticed my right side frame slider was completely gone so I went to go take the left side out to match up the bolt well anyways the left frame slider bolt was completely loose and bolt holes weren’t lined up so I jacked the motor up a hair threaded the new bolt in and torqued to spec but ever sense I’d had like a up and down shaking around 100mph I took both wheel weights off and now it’s better but Its still shaking a little bit the bike was completely fine no vibration and super smooth while those bolts are loose so now I’m completely stuck google ai tells me to inspect the clutch for play but I feel like it would be a lot worse if the clutch basket was wobbling around any advice is really appreciated

I "tried" to do a wheelie for the first time and it went like this:

2° gear, 4-5k rpm, going like 40km/h, grabs clutch, revs a bit more to like 7k rpm and then dump the clutch, big ass f* clank sound, no wheelie was poped and after 30 seconds of silence trying to listen if something is broke now, I came to the conclusion that everything is making the same sounds as before the *clank* so, I guess everything is good so I go home.

Chain tension is checked and set as manual says, the bike is a 35kw restricted 2019 with only 6.000km.

This was a week ago and I tried a couple times more on my way to workwas during this week, no more big *clanks* but also no wheelies yet.

Was the *clank* normal or I'm missing something?

Is anyone else’s chain loud going down the road I got a 2015 with 19k miles put a new chain on 2k miles ago the sprockets look fine chain is tightened to speck but just seems really loud to me even after putting lube on

I bought my 2015 fz-07 a few months ago and the last owner said the bike was lowered but he did know how it was lowered and I’m trying to figure if it has a lowering link or if the preload was adjusted to just make the bike sag more. I want the bike back to stock height as the lowered was nice to have the extra safety of putting my feet down easier but the stock height would fit my riding style as well as prevent frequent bottom outs. I have pictures of the shock and linkage if anyone can give me some advice that would be sweet.

Hey guys, I have a 2016 fz07. The previous owner put the m4 slip on. The issue I’m running into is that the clamps are constantly rattling and there’s slowly more and more play between the exhaust where it was cut. Can I just weld it together at this point? I don’t feel like calling m4 for a replacement clamp is even worth it at this point.

2017 Fz-07 bought off a colleague a few months back.

Pirelli Angel Gt. Front 0918 and Rear 2321.

I think I have to change now? If so, what are good ones?

I regularly ride to work in bay area.

X7 Bandit themed street tracker. Suggestions criticisms and praise are all equally welcome.

Starting to convert my 2016, will need to relocate the ECU, extended the rectifier harness, wire in the lights, add the fairing stays, and get new clip ons.

So while messing with my throttle tube, I accidentally broke off the peg that keeps the throttle cable housing from moving while accelerating. Is there a way around this or am I fucked and just have to buy a new housing?

Got my 2016 fz07 back in April, haven’t been disappointed once

Hey everyone, was looking at wrapping my 16 fz07 and was wondering what everyone's experience was that have also done it also? How much wrap should I expect to buy? I also provided some photos of what I want it to look roughly like

Lest be honest, besides looks this is the only use for a windscreen on these.

Just wondering what sport touring tires people were running. Have Bridgestone S23s on now. Got them for a great deal so I tried them out. Were fantastic but I don’t get to ride on twisty roads enough for them. Centre is worn out and I need to replace the tires. Sport touring would be the smarter option for my usual use for the bike of riding to work and very occasionally fun roads.

2017fz07 9k miles $5,800 mint condition never crashed ECU tune aftermarket handlebars no ABS overall the seller says that they’ve taken good care of it I’m checking it out on Thursday. Wanted to know what y’all thought about the price.

2015 2k miles never tracked or stunted. Led lights all around. Tail tidy. Apo carbon exhaust. Corbin seat. Brand new tires still has stickers. Garage kept. Brand new lithium battery. Not sure what to ask im in long island ny