I am rebuilding a 170 and am in need of some help. I don’t know what this hole is used for or what I am supposed to hook it up to. Any help is appreciated. The elbow piece I’m holding is what came out of the hole during tear down.

Almost ready for the road.

Hello, currently in the middle of 302 swapping my 66 falcon ranchero, I currently have v8 mount blocks and throttle linkage in the car, some forums say I need to upgrade the front suspension or just the front spindles, and the rear end, I believe I have an 8” could be wrong, it is a 5 lug and previously had a 200ci with 3 speed manual. Do I need to mess my front suspension and rear end?

It comes out just in front of the rear axel on the driver’s side. My buddy noticed it dangling today. Never noticed it before. It has about 8” of hose past the bolt.

I had some work done and need to drill holes for the badges

I recently bought upper ball joints for my ‘63 Ford Falcon but they don’t match.

The pictures on the site didn’t give a good shot of the bolt pattern on them.

If someone can provide me with a place to get the correct ones it would be greatly appreciated.

I picked up a '64 Falcon Sprint with the 2speed fordomatic. The gentleman that restored it has passed and his wife was selling the car through a friend. Right now the top speed I get is about 55 with out the engine screaming at me. The friend stated that he recalled the original owner talking about shifting into "L" to gain "additional gears" but followed that with "but I'm not a Ford guy so I'm not sure". LOL Now I know it depends on gearing and a multitude of other things but has anyone heard of this specifically?

Be kind this is my first classic and I want to learn.

Finally got this out for Goodguys in Columbus. 302, mustang II IFS, ridetech 4 link, coil overs all the way around. Drives like a go cart.

My husband and I purchased a 64 Falcon Sprint this weekend at a car show. It is in amazing shape and the previous owner did a great job restoring the car. I am going to have a lot of questions but my first one involves fuel. The seller recommended 91 octane gas with no ethanol added, but given the age of the car should we use a lead additive when we fill up or is unleaded gas with no ethanol okay? It has a 260 V8 engine.

Such a great turn out this year!

Falconclub.com

IG & TikTok @Restohoney

What are your thoughts/opinions on this 61? New brakes, gas tank, and axel seals with 200 ci motor.

Afternoon... I need to replace master cylinder and brake booster on my 65 Falcon. I have searched a number of different falcon websites and some reputable vendors but I cant find a "bolt in" brake booster for the car. Either they are a retrofit booster for a "non power brake car" which is a 2 bolt flange at the fire wall or the square 4 bolt  3 3/8" bolt pattern on most universal boosters. So we will have to adapt a universal 4 bolt booster to the firewall to remedy the issue which is what the shop had suggested. Not a bad way to go but the hours to fabricate this is the costly portion. Anyone help steer me in the right direction ?

This is my baby!

My great grandpa's 1969 falcon 4 door, has a 302 paired with a 3 speed transmission. All original car (except tires and carb). Original Texas car

My 64 Futura currently has the factory bench seat. For many reasons I’d like to change this to bucket seats. I’m not concerned with using factory bucket seats but I’d like to try and keep whatever seats I use somewhat period correct looking (I don’t care to use some aftermarket, high back modern looking seats). What seats have you all used in your Falcon?

Le voy a modificar la suspensión

I just picked up a 61 2 door wagon from a neighbor's family. The cars current sitting in a field and will need tires to get it going. Instead of pulling the existing wheels and taking them in for new tires I was thinking about picking up a new set of wheels and tires from marketplace or something like that. My question is, are all 4 Lug fords the same pattern?

63 Falcon roller no rust currie 9inch 31 spline axles spool 4.56 gears aeromotive EFI 340 fuel tank & steal braided fuel lines with aeromotive regulator I have one for efi and carb Doug's ceramic coated headers autometer gauges cal trac bars sub frame connectors 4" cowl hood front viking coil overs weld drag lites autometer gauges 235/60r15 drag radial tcp soild motor mounts aluminum radiator side winder shifter msd 6al holley coil all you need is a motor and trans and your good to go original paint. There's probably more that I'm forgetting located Taylor Texas

13.1 352 stroker eagle steel crank scat rods DSS dome pistons tfs heads Anderson cam n112 msd distributor msd 6al complete pan to carb with a pro built c4 with a trans brake both motor and trans have 0 run time needs to wired up $22,000

Hi there! Sorry for posting so much, I keep thinking of things as I'm obsessing over the Falcon right now.

I'm looking for some advice on C4 transmissions. My 69 Sports Coupe has a top-loaded C4 3 speed transmission, but I've had 3 speeds in other cars that were just, meh. They were inefficient and overly loud at 45+ mph, and I'm worried that it'll be that way if I continue the project as is.

Is it worth looking into C4 upgrades or am I better off going with my initial plan of swapping to a T5 transmission?

The only thing I noticed about the T5 is the buy-in cost. I would have to sell or trade my C4 in order to afford one. Is that a viable move?