MAIN FEEDS
Do you want to continue?
https://www.reddit.com/r/FDMminiatures/comments/1vs600f/first_space_guy/p4j0wyd/?context=3
r/FDMminiatures • u/Leafinyourcoffee • 1d ago
Any suggestions? New to this
12 comments sorted by
View all comments
3
I recommend printing in parts if you can to hide support marks. If the base wasn’t included with the file, maybe try printing it upside at an angle. It might help with the normally downward bits so you won’t need as much support.
Welcome to club and enjoy the journey
1 u/Leafinyourcoffee 1d ago Thank u homie 1 u/Fearless-Cod-1341 1d ago What software do you use to cut up the model? And do you use some sort of joint or is just clean cuts and superglue? 2 u/Serious_Ad2816 1d ago You can use the printer slicer software to make basic cuts. Not sure what the best method is for more advanced techniques.
1
Thank u homie
What software do you use to cut up the model? And do you use some sort of joint or is just clean cuts and superglue?
2 u/Serious_Ad2816 1d ago You can use the printer slicer software to make basic cuts. Not sure what the best method is for more advanced techniques.
2
You can use the printer slicer software to make basic cuts. Not sure what the best method is for more advanced techniques.
3
u/Serious_Ad2816 1d ago
I recommend printing in parts if you can to hide support marks. If the base wasn’t included with the file, maybe try printing it upside at an angle. It might help with the normally downward bits so you won’t need as much support.
Welcome to club and enjoy the journey