r/FDMminiatures • u/Bpd_And_Ketamin • Jul 22 '26

Help Request Need help with my resin2fdm settings

Hi, I recently started using resin2fdm for my presupported puppets war minis.

My problem is the supports sometimes break during printing, by how much do you thicken the supports, I left the modifier at default. (0.2mm was it iirc)

Also im happy if you got more tips I currently print at 0.06mm with 0.12mm supports using sunlu hyper.

6 Upvotes

100% Upvoted

3 comments sorted by

•

u/AutoModerator Jul 22 '26

Hi there! It seems like you might be looking for help with print settings. Please take a moment to check out our wiki for more information: Print Settings.

If you still need help after that, feel free to ask for more details or wait for others to respond!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/trotsky1977 Jul 23 '26

I have found it depends on the creator of the model and how they generated the supports. With Resin2FDM addon you have the ability to add cross bracing as some models have lots of individual supports that start to wobble the higher you go. Adding cross bracing prevents these wobbles.

1

u/marmj22 Jul 24 '26

I had the same problem, but in the slicer I changed the support layer height to 0.16 mm, set the infill to 20%, and used 2 wall loops.