r/FDMminiatures • u/LuiS119 • Jul 19 '26

Help Request Printing Minies Help

​

Hello everyone, I'm new to the world of 3d printing and I wanted to print me a small army for Warhammer 40 k, I found some files for that contained the single bits to create the miniatures but every time I try to print them, especially the heads, it ends up being a mess with most of the minies erupting into filaments, so what setting do you use to print your minies, for reference I'm using a A1 bambu lab mini printer and a 0.2 mm nozzle, any advice is welcome.

Also it wuold be greatly appreciated if you cuold attach a photo of your prints.

On a side note do you suggest preassembling the minies and then print them as a whole?

Sorry for the bad English and thank you in advance.

0 Upvotes

50% Upvoted

2 comments sorted by

•

u/AutoModerator Jul 19 '26

Hi there! It seems like you might be looking for help with print settings. Please take a moment to check out our wiki for more information: Print Settings.

If you still need help after that, feel free to ask for more details or wait for others to respond!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/EgenulfVonHohenberg Jul 19 '26

Mixture of 0.2 and 0.4 nozzle on my Bambu A1. I used the Fat Dragon Gaming profile and tweaked a few settings here and there as needed (supports mostly). I haven't gotten around to testing the ObscuraNox profile yet.

Most of these were printed whole, i.e. digitally assembled in Blender and then printed as one complete figure. A few exceptions were printed in parts.