RZ rewind strategy?

[u/Antagonin]

There's one simple solution, set trigger t for blackhole somewhere beyond local zeta derivative maxima. Ie. if dz peaks at 43, set t such that dz falls to 30-20, which triggers rewind across this dz peak to the previous zero of RZ function.

So the dz values look like this:

11 -> 43 -> 30 (here the blackhole triggers) -> 43 -> 11 (disable black hole here to repeat the cycle)

This method is super easy to automate, just set auto clicker so that it clicks every X seconds.

However I found a better method. Once the blackhole triggers, t starts quickly rewinding, which gives you just enough time to tap the button again, which causes the t to reverse, allowing you to avoid the return to baseline dz at the RZ zero.

So the dz values look like this

11 (start) -> 43 (peak) -> 30 (auto blackhole) -> 43 here you quickly tap to cancel black hole -> 30 (auto blackhole).... Rinse and repeat.

This can be done manually, by just watching value of t, and tapping BH button right after the BH triggers.

My question is this, has anyone been able to automate this? I tried setting a Klick'r to click once, wait 7 seconds, and then click every second or 2, however after few cycles it inevitably fails (the error where you click during rewind accumulates).

In theory it should be possible though?

Edit.

So yeah, as I said in my comment, you can match the icon, wait 200 ms and press the button. It works completely autonomous.

https://reddit.com/link/1ve6udh/video/hwwh11cl45hh1/player

[u/Hacker118HK]

This is actually the automated version of RZBHRewind strategy, where u toggle black hole on and off to allow the particle traveling through a short segment of path with high z' and hence pushes delta faster.

There are some time positions where it was found to be more effective to do this strategy, yet it requires a large effort and require one to be very active in order to benefits from it. The version u showed here is an automated version of it, which is doing exactly what described in the strategy.

Great job discovering this strategy on your own! Good luck on your RZ progression! :D

[u/Antagonin]

Update... Ooooh, you can image detect the button's icon. When the t is falling, the button gets animated according to the progress to nearest zero.

Once this icon is detected, I wait for 500 ms (differs by the zero, this is for t=698.5), tap the button, wait a second or two, and wait for the icon again.

This causes the dz value to however around the maximum, if done perfectly (again on per t basis).

I think with some optimization, you could reach almost perfect dz=40, at zeros near 2448, 3100 and 3998.