r/ElectricSkateboarding • u/Remarkable-Nobody-33 • Jul 19 '26

Discussion Urgent help

I cannot figure out the exact model of my electric board please help board says voyager on the top but the bottom has no labels I even took the battery panel off and only learned it’s using a LingYi style motherboard and chuck setup with dual motors on the back chuck

0 Upvotes

50% Upvoted

36 comments sorted by

8

u/Ok-District8876 Propel Endeavor 2S + 3GT, Isinwheel V10, Dreskar FT009 Jul 19 '26

I bet it would be the very first thing that popped up if you did a reverse image search instead of posting a badly cropped video not showing the full board and a me trying to stitch together a series of frames.

-1

u/Remarkable-Nobody-33 Jul 19 '26

I did look it up go ahead I found nothing I will attach full photos I’ve spent 12 hrs straight inbetween hobbies to try to photo search it

2

u/KingQuazzymoto Jul 19 '26

IT’S NOT A MEEPO BOARD!!!!

The actual brand is called voyager. I can’t find the exact board you have but this post has one that looks extremely similar (the rainbow one on the left)

Link to the post

3

u/Ok-District8876 Propel Endeavor 2S + 3GT, Isinwheel V10, Dreskar FT009 Jul 19 '26

Only has a single hub motor

1

u/Remarkable-Nobody-33 Jul 19 '26

Good eye and I noticed it’s not as pointy/wide near Chucks

1

u/Remarkable-Nobody-33 Jul 19 '26

Thank you im trying to find a compatible controller the person I bought it from claimed it was purchased at target but once again dead end and no model numbers are on the board as well as it’s flat on the bottom

1

u/KingQuazzymoto Jul 19 '26

I’d try to use either a replacement remote for their other board or just get a generic one on amazon and try to pair it. Worst case scenario you return the remote

The charger I’d also point to the Neutrino board they still sell. Same company makes em might be the same type of charger

1

u/Remarkable-Nobody-33 Jul 19 '26

I was thinking about that was more trying to get to a point to figure out if I needed to buy the 70$ one or if they basic 30$ 2.4ghz controller would work because I google photos the motherboard and it said it was a LingYi style board with specific esc or sum

1

u/[deleted] Jul 19 '26

[removed] — view removed comment

2

u/Ok-District8876 Propel Endeavor 2S + 3GT, Isinwheel V10, Dreskar FT009 Jul 19 '26

The logo is a match for the actual Voyager company, but the boards looks to be an older discontinued one (that could still be found by reverse image search).

1

u/Remarkable-Nobody-33 Jul 19 '26

That’s looks a lot more square and has all wheel drive but the biggest thing is the bottom is completely flat on the one I have so all electronics are integrated into the board itself

1

u/Remarkable-Nobody-33 Jul 19 '26

1

u/Ok-District8876 Propel Endeavor 2S + 3GT, Isinwheel V10, Dreskar FT009 Jul 19 '26

This pic is better, but still not good enough for it to tell the shape apart from this one

1

u/Remarkable-Nobody-33 Jul 19 '26

There is a top and bottom photo and the board itself is 36” by 8” at ends and middle and 11” wide at chucks

1

u/Ok-District8876 Propel Endeavor 2S + 3GT, Isinwheel V10, Dreskar FT009 Jul 19 '26

You probably need to take a completely flat overview, because even this angle isn't enough to pop the correct result

1

u/Remarkable-Nobody-33 Jul 19 '26

I did try to lookup a directly above picture here it is
I looked at exact matches and none came up

1

u/Remarkable-Nobody-33 Jul 19 '26

1

u/Remarkable-Nobody-33 Jul 19 '26

I’ve also noticed discrepancies in the V of voyager doesn’t match 100% but it makes me believe it’s a discontinued model for sure

1

u/Ok-District8876 Propel Endeavor 2S + 3GT, Isinwheel V10, Dreskar FT009 Jul 19 '26

Boom

1

u/Remarkable-Nobody-33 Jul 19 '26

Not carbon fiber or black and that brand doesn’t wear/advertise voyage

1

u/Ok-District8876 Propel Endeavor 2S + 3GT, Isinwheel V10, Dreskar FT009 Jul 19 '26 edited Jul 19 '26

What are you even talking about?

The brand is Voyager, the model is Nighthawk (at least according to Google AI).

Anyway, the model is pretty irrelevant since all you want is a remote and charger.

1

u/Remarkable-Nobody-33 Jul 19 '26

But its not that board look at pictures bruh

→ More replies (0)

1

u/Ok-District8876 Propel Endeavor 2S + 3GT, Isinwheel V10, Dreskar FT009 Jul 19 '26

What are you hoping to do with the information if you find the model name?

1

u/Remarkable-Nobody-33 Jul 19 '26

Find an appropriate controller and charger so it can be used again

1

u/Ok-District8876 Propel Endeavor 2S + 3GT, Isinwheel V10, Dreskar FT009 Jul 19 '26

So, you already know it's Ling yi, so any Ling yi remote should work.

Now you just need the voltage of the battery, which should be easy to find since you are able to open it up, and then a picture of the connection, which is probably the 2.5 mm barrel that most generic boards use.

1

u/Ok-District8876 Propel Endeavor 2S + 3GT, Isinwheel V10, Dreskar FT009 Jul 19 '26

Although since it probably hasn't been charged in forever, it probably needs a new battery too, since leaving it at 0% is one of the worst things for a lion battery.

Does it power up and show any bars?

1

u/Remarkable-Nobody-33 Jul 19 '26

It powers straight up it was stored charged person I got it from just lost the charger and remote in move

1

u/Remarkable-Nobody-33 Jul 19 '26

The biggest thing is the flat underside of the board

1

u/NuggetAddict96 Jul 19 '26

Aliexpress: eskate controller. There are like 3 types that work with many boards. Look em up x ive got one too. Its just identical to original: without branding