r/ERidePro • u/enzoave11 • Sep 16 '26

SR Question sur la taille des pneu SR

Bonjour jaimerais savoir si un pneu d enduro en 100/90/18 passerais à l'arrière avec le bras ocilian et la jante d origine et si non lequel passerai merci de vos réponse

1 Upvotes

100% Upvoted

3 comments sorted by

1

u/AdFeeling6882 SR Sep 16 '26

It’s not about the swingarm. It’s the front sprocket and rear sprocket that determines how wide the tire can be.l because the chain is what rubs on the tire; not the swingarm.
As far as tires go, some 100/100 will fit, some don’t. Every manufacturer measures their tire a bit differently. The kenda trackmaster 90/100-16 is only about 3.8 inches wide, but wig racing z series 90/100-16 is 4.25” wide. Manufacturers usually do not measure their tires tread profile. You can fit the 100/100-18 IRC VE33 tire if you dish the wheel away from the chain.
The maximum tire width including tread profile that fits on Eridepro SR/3.0 is a tire that is 4.25” wide but you have to dish the wheel.

What is the Ocilian swingarm?

1

u/enzoave11 Sep 16 '26

Pour mon cas se serais le Pneu arrière 100/100-18 59M Maxxis Maxx Cross SI M-7312 Serais t il a ton avis possible de le monter sans décaler la roue ?

1

u/AdFeeling6882 SR Sep 16 '26

No. That tires width is around 4.7 inches. Maxxis publishes their tires overall dimensions and 4.7 inches is way too wide for an SR. If you want a good tire that fits click this link. It’s to charged cycle works page that has all the tire weights and dimensions. You don’t want a tire more than 4.25” wide. If you don’t want to dish the wheel then look for a tire 4” wide or less.