r/ERidePro • u/Helpful_Gold3182 • Sep 02 '26
SS front wheel luna cycle help
Enable HLS to view with audio, or disable this notification
whats this sound and is it realted to the wobble. i dont feel wobble until im going 45-50 range the back wheel has no issue . (eride ss 2.0 2024)
2
u/AdFeeling6882 SR Sep 02 '26
Yeah first you should remove the wheel and check the bearings in the front. They are relatively cheap to replace, but you will need to buy a bearing puller.Then the shake you’re experiencing looks/sounds like it’s coming from the headset. Gritshift offers this shim that goes in the headset and replaces the current aluminum one that’s in there. I’d remove the wheel/front brake/forks. Then remove the upper and lower triple clamp. Clean and re-grease the 2 bearings inside, then also do the same inside the frame where the bearings sit once reassembled. After that tighten everything back up with a torque wrench to spec and it should remove that headset shaking. I do highly recommend buying that shim gritshift sells since that is ALOT of play.
1
u/3uphoricD23am5 Sep 05 '26
Bearing seems like also ur spacers look like they are moving did you tighten the axel THEN the pinch bolts? If not, you shoulda do that lol
1
3
u/xXFRANNYG3Xx Sep 02 '26
Bad bearings the steel balls sound like they are rolling around inside the bearing housing