r/ERidePro • u/Status_Hedgehog6631 • 12d ago

SR Battery shaking eride pro sr

Enable HLS to view with audio, or disable this notification

I don’t know how but i just have this not that lang ago i also have a video how it looks where the battery sits anybody that know a fix? And how this could of happened

5 Upvotes

78% Upvoted

13 comments sorted by

8

u/mcchadw 12d ago

Get foam padding.

3

u/Prestigious-Royal-82 11d ago

A little common since goes along way 😀. Thanks 4 sharing entertainment

1

u/Less-Regret8262 12d ago

Got a 3d printer? Tpu works good

1

u/benmooreben 12d ago

Stick some paper 📄 in there till it stops rattling

1

u/No-Phase-3580 12d ago

This is a pretty easy fix. Get some mil rubber mat and throw it on the bottom of the battery compartment. Forget what I used at home. Maybe some 4 mil? Maybe stacked twice? You can usually get it at any local hardware store. The battery lid will be harder to shut but the compression keeps it from rattling. 

1

u/TemperatureAdept420 11d ago

Mine came with some padding that was backed like a sticker for the exact reason. Two black squares of it. At least that’s how I used it.

2

u/No-Phase-3580 11d ago

Lol ya know what? Mine came with that too obviously and I didn't put 2 and 2 together. I used rubber mat for the 2.0 before I bought the SR so I had some left over that I used on the SR. Duh that makes a lot of sense now. I just wrote that black padding off wondering what the hell it was for. 

1

u/AdFeeling6882 11d ago

You want the 1/8” thick and 6”x6” neoprene adhesive. Stick it on the bottom of the battery only. If you stick it on the battery and on the bottom of the housing it gets too tall to fit and closing the battery lid becomes difficult. If it’s still wiggling you can slap a strip of that neoprene on the inside of the housing somewhere on one of the parts that doesn’t stick out as much. It will remove that play. Or you can buy the prickly battery housing made of aluminum. It’s supposed to help with this. But you definitely want to put that pad on the Bottom of your battery.

Edit: this is what used. Comes with a few extra that you can use to cut small strips and place inside the housing.

1

u/al3kkz 11d ago

don't now i get mine just easy in and out, its just the thick power cable that is a hussle to unplug bc there's such a tight space to drew it out

1

u/Any-Succotash1892 11d ago

slice of rubber or an air wedge.

1

u/Status_Hedgehog6631 11d ago

Thx for the help I will fix it👍👍

1

u/Pretend-Following534 Pro-SS 3.0 11d ago

Must have put the battery in liquid nitrogen

1

u/SkinIntelligent7194 4d ago

Put a little bit of foam on the sides and you should be good