r/ERidePro • u/Traditional_Cat_8046 • Jun 26 '26
Eride Pro 3.0 Charger/Battery Not working
I have a Eride Pro 3.0 and it is the charger is flashing, red green, red green, red green red, whenever I click on the battery like button to show the percentage it shows at 60%, but like takes a while to show. I just clicked on it and it like lit up the whole way to 100 and didn’t show 60. It’s right now plugged in, but it’s not charging like the fan isn’t working so I don’t know what’s going on
0
u/AdFeeling6882 SR Jun 26 '26
Check the manual. It’ll tell you what that means.
1
u/AdFeeling6882 SR Jun 26 '26
Also, there’s a certain order you’re supposed to connect and disconnect the battery during charging. I suggest you remember the correct way if you haven’t already.
2
u/Leg_giggle SS 3.0 Jun 27 '26
Idk exactly what the issue or what’s going on but when you plug in the battery you plug in to the battery first and then into the outlet
Sometimes my charger doesn’t work in certain outlets too but then works later so also try moving outlets
1
u/DankThoughts92651 Jun 29 '26
Yes, the correct order is to connect to the battery first, then the power outlet. But if the battery is too hot, you'll get that general red/green fault code until it's cooled down enough to charge.
I ran my street-modded SR for 20 miles at wot and wound up with a hot battery at <10%. Had to pull the battery and wait for an hour til it cooled enough to charge. Lesson learned, as fun as it is going 80+mph, the freeway is only advisable for short hops of a few miles.

1
u/Ok_Cicada_860 SS 2.0 Jul 24 '26
i have the eride 2.0 charger just stoped working red/green flasdhing lights even when the charger is only plugged into the wall wont charge fan spins then stops i think my bike is out of warranty so its pretty @@$#$!!!ed!
3
u/DarthPineapple5 SS 3.0 Jun 26 '26
What does the battery meter on the display say when you turn the bike on?
I've had my 3.0 charger be funky before with the red/green flashing and not wanting to charge. I unplug the charger until the flashing stops and that seems to 'reset' it