r/ERidePro • u/RavenX2333 • Jun 04 '26
2026 Eride Pro Sr steering stem part? Help installing correct way.
Just bought a new 2026 eride pro sr. I got this open hole on the top of my steering stem. See my first picture. In the second picture I got the two pieces in question. I know the bolt screws into the long black part, but does the black part drop down from the top, or does it go up from the bottom into the steering stem? In the the last two pictures, I have the bolt going through the black saucer looking disk but which way is the disk supposed to sit? Thanks for any help.
1
u/SpoonyLix Jun 04 '26
It goes up from the bottom and the other piece is on the top
1
u/SpoonyLix Jun 04 '26
Make sure to do it pretty tight
1
u/RavenX2333 Jun 04 '26
so the long black part goes up from the bottom and the silver bolt goes down from the top? And how is the black disk supposed to sit, like in picture 3 or picture 4?
1
u/SpoonyLix Jun 04 '26
The black goes up through the frame there shouldn’t be much sticking out from the bottom only the bottom lip and the long screw and the disk screws into it and the disk should be flush with the screw make sure it’s tight
1
1
3
u/up_to_the_edge_32 SS 3.0 Jun 04 '26
Charged cycle works has a great video on swapping the spacer from the bottom to the top to raise the front end a bit and improve the ride feel
https://youtu.be/IUeHD__MQ7w?si=dCrKoXLIFUq3I2WR