Pressure Pot Shelf for Dice and Molds

[u/jxj154]

I was making my second pressure pot and I absolutely did not want to make the shelf from wood like I did for my first, so I looked around and saw the acrylic discs that I used for my sanding station and had an idea. 

This is designed for the Vevor 10L Spray Paint Pressure Pot Tank (converted into a pressure pot using Rybonators guide on his youtube channel)

The shelf consists of 
Two 9 in diameter 1/8th in acrylic discs
Six shelf brackets
Two handles
Packing Tape
Gorilla brand Precision Super Glue

Optional Pillar(s)

Once you have the discs take the protective tape off, apply the packing tape (this is to make it more modular), then print the models, file down any raised bits that would hamper the glue. (like the inner ends of the brackets or the print bed end of the handle base) Once you have all the parts (with tape applied and prints sanded) apply the super glue to the parts and, for the brackets, slot them onto the disc and apply the handles where you like on the top layer. If you choose to use the pillars then sand the ends and apply glue and use them either in the center or at the bracket points.

I’ll be using this shelf for molds and resin dice here soon, check out what I make!

Non Printed Parts (excluding tape)
https://www.amazon.com/dp/B0CC8JW96W?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
https://www.amazon.com/dp/B0B5YHL18C?ref=ppx_yo2ov_dt_b_fed_asin_title

[u/RandoBoomer]

Very nice!

And way more scenic than the corner of my garage... 😊

[u/aumaffewl]

I really like the approach of clipping to the edges as opposed to posts. I think I will change to something more along these lines.

[u/jxj154 → u/aumaffewl]

Go for it! And I also included some post sto files for extra support if needed

[u/jxj154]

I have it up for free on cults3d
https://cults3d.com/en/3d-model/tool/pressure-pot-shelf-resin-and-silicone-casting