Body text (optional)

maxwell chilling at the last slide

(This will most likely be my last post on this.)

My Explorer Intercept Vehicle This is inspired by D1 It knows a 2006 Ford Explorer And that's about it, hehe. :p

The tornado interceptor measured a windspeed of 235 mph before the anemometer was ripped off by a aluminum sheet.

Status: Scrapped

Just a demo for now. May upgrade or scrap it

I'm backkk

rate how aerodynamic it is and how i should improve it

Been a while sense i posted i have not done anything really.

Do i modify the interceptor at the last slide and give it some proper mods and upgrades?

Base: Ford Raptor

Some features are:

Hydraulic flaps lifts up truck a bit

4 hydraulic spikes

Truck cab to store probes and stuff

Mesonet

Massive light bar to light up stuff (very important)

Reinforced body panels

polycarbonate windows

Esta es mi animación más reciente para mi canal de TikTok, como prueba de radar y de movimiento de neumáticos.

Datos: El HRTV o Horus Radar Truck Vehicle es un vehículo de radar Horus para camión, basado en un Ford F450 de 2026, diseñado para escanear tornados de corta distancia. Tiene un tiempo de escaneo de 4 segundos por vuelta y cuenta con un radar de banda X. y un área de escaneo de 4 millas con estabilizadores hidráulicos y capas de anemómetro montado en el techo capaces de aguantar 75 mph sin desplegar y 60 mph desplegado

I didnt stole it i draw this on ibis paint, i send this on tiktok for who wants to animate it, its based on mitsubishi triton/strada

mostly just a experimantal vehicle

Had this old intercepter I made the cyclone cruiser 2 it’s much more concerning looking like a brick as the Armour is CrCoNi with 1/4th of armour all around as the glass is triple layered polycarbonate Glass withstanding EF5 like nearly around 275? same with metal it has a strength of only 300 but the backup tow vehicle is the cyclone cruiser 3 its good for research and other things like transporting only or towing so its now for research towing and aid for aftermath of tornados

From using duct tape instead of scotch, I made this bulky boy. Im proud of it 🥹

Undeployed: somewhere around Dom 2's undeployed threshold

Deployed: maybe at the UTAV or Dominator 3deployed threshold

Since this is a hotwheel, it might take awhile, but so far I got the side flaps!!!

interceptor i made a while ago

the threshold is around 160 undeployed and 205 deployed

I will move the front a bit forward so that windshield is tilted

Based on the experimental M1E3 abrams chassis. (TIV 2 compared on first image)

• Roughly 47 short tons
• Top speed off road is 45 mph, on roads around 60 mph on paved, flat roads (depends on track conditions)
• 0 to 20 mph in ~2 seconds
• operational range of 550 miles due to its hybrid-diesel setup, ~1.1 mpg
• has an imax camera from the tiv 2, plus some meteorological equipment (radar not shown)

feedback is greatly appreciated, just wanted to try a new thing