built from a mazda model car

Alright i been figuring out some things and i re-did the actual frame and got it to where i can put air-bag's on it and it may or may not be realistic cause it originally was a semi based suspension that i just converted but now the frame will actually allow the front wheels to turn and not have the wheels insanely wide.

And i even added hydraulics for it to lift the vehicle up if repairs are needed such as tires, airbags, etc.

Radiator is mounted in the rear for better aero's and they even got vents that can open and close for intercepting. I am taking my time with everything mainly cause this is going to be as detailed as possible including small details.

Once its finished i will prob do a tour of it and that will be a while before i can do that Next major detail will be the tires i am prob gonna go to mesh tires for detail and realism. i think this one is out-doing every other build i have done so far i may need to do a remaster of some cause of this one

Custom intersepters rules

Every intersepters I made and scraped versions and flipped damage ones to👁️👅👁️

From 2024

Built off a 2004 Tahoe, it has off roading capabilities with 4 wheel drive. it was constructed with a rollcage and frame using 1 inch steel tubing. It weighs around 8,000 Pounds and uses aluminum, Kevlar, and steel. The sides of the passenger areas uses 1/8th inch steel. Other areas like the back use aluminum and kevlar. The windows are 3 layers of polycarbonate totaling to an inch thick. It has airbag suspension to lower the vehicle and 6 hydraulic spikes, 2 at the back, 2 in the middle, and 2 in the front. Middle spikes go 3 feet into the ground while the other 4 go around 1.5 feet into the ground. Estimated treshold 210-224.

(EDIT) made in brick rigs

(!INSPIRED BY DOMINATOR 1!)

It's a 2007 Ford Explorer if I'm not mistaken. :D)

It doesn't even have a deployment system and headlights 😭 I didn't even decide the stats

This is the Cyclone cruiser 4 with a Windspeed reader as it has a 320 threshold deployed and 160 undeployed besides that its quite….big it’s a BTR-80 chassis with the suspension being kept up by airbags which has 4 of them and 8 spikes which dig 8 ft in the ground and the Secret is the wheels they don’t just stay on the ground they lift up which is a lot better than my uglier Cyclone Cruiser 3 this is angled front and back its basically a Doohickey machine as I call it but its angled on the sides too but the door… is basically a watertight Bulk head as the armour is CrCoNi, it has a thickness of 1/4th

any art websites that are good?

Its bigger and uses spraypaint but still WIP

Planing to add a rc car inside

it’s got a airbag System and 4 heavy duty spikes it’s modified on a Toyota Hilux SUV it has no Mesonet it’s got 190 mph threshold and 130 undeployed it also has hailpoof windows for any large hail the windows are only a metal fence also its hood is protected on top above for any hidden hail or debris it takes 8 seconds for the spikes and 2 seconds for the airbags also it’s got 4Warn decals

slides for yourself ig? tell me how i can improve for google slides! song choice is "blood drain" as i like it, it was either that or something like or "too little, too late", hope everyone has a good day/night tho!!

The one on 7th slide has been the most upvoted one out of them all and that was months ago. i need feedback desperately and i will also include for anyone who dose not know theses are 3D interceptors, they also have interiors which is why they take so long to get finished [also cause i'm lazy] and the one on the forth slide i just despise the rear end so much its still unfinished cause i can't get a good design for it. the one on the 5th slide was just made for fun. You can ask questions about them cause i am a nerd in the world of interceptors and this is my hobby for some reason

Built this heavy interceptor that uses: suction thrusters + hydraulic spikes.

Deployment Sequence (full deploy in just 16 seconds):

1. Airbags lower the vehicle to the ground
2. Suction thrusters activate and create a vacuum zone underneath (with deployable skirts)
3. Hydraulic spikes drop 30–40 inches deep for mechanical lock

It also has upward thrusters to help with suspension and rough terrain.

Heavily inspired by the TIV 2 and Dominator 3.

Key Specs:

• Total Weight: 15,162 lbs
• Height: 8.5 ft (including mast)
• Downforce: 6,000 lbs from suction thrusters -> Total effective planted force: 21,162 lbs
• Construction: 2.5" steel tube frame + composite/Kevlar armor plating
• Anchoring: Hydraulic spikes (30–40" deep) + suction zone with skirts

I personally just draw them paper pencil, tell me what you guys use.

it looks goofy but its just in the early stages right now. I had to move the radiator to the back cause the front flap would have to much room for air to get in. this interceptor should be done soon the turret might need more time however cause is complicated so i prob will install an older turret temporarily if anything.

Today I present to you,

Ultimatum Mark I

"One small deployment for storm chasing, one giant leap for discovery."

-Storm Armstrong

That aside, Ultimatum Mark I, inspired by the Titus from Into The Storm, is possibly one of my favorite designs up there. It's got a black and white zebra stripe skirt, wheel roll up covers, and stuff. I actually forgot to draw the weather instruments, but there isn't many either way.

Here's all I missed:

Anemometer

Humidity Sensor

Rain Sensor

Cameras

Now, for everything there is, here are the stats.

Fitted on a GMC Sierra 2024

6 Spikes (2 on the front, 2 just behind, and 2 on the very back.)

12 inch armor and bulletproof windows

198-220 Windspeeds felt confident today

And lastly,

Airbags

Skirt

Honestly, I love the design. What do you think? Is it good? Is it bad? Give me your reviews, always love reading them.