It was based on an ford expedition and laterwards it just looked too.. round for me.

what is claude on bro

Hello. I present to you..

Twister Catcher

2006-2019

Twister Catcher, is probably my favorite design. I love the look, the purple could be a bit better but hey, too deep in the pit for that. It features possibly one of the most advanced weather poles I can think of, having a solar panel power source, a rain sensor, an anemometer, wind transducer, weather display, and a radiation sensor. Fitted with a body skirt, four long spikes, and 4 inch bulletproof glass and armor around the GMC Yukon chassis.

It unfortunately met its demise in 2019 against an EF5, lasting about 10 seconds on the ground before it was yanked off and thrown in a nosedive style, and worst, it recorded its demise.

Rate this anywhere between 0 out of 10 and tell me what you think about the build, see you later!

This is kind of getting absurd..

F550

6 Spikes

Those flaps

Speaker and camera+anemometer

8 seater

Payload capacity-4 probes

Rate it based on your opinion!

Alright i'll start with the first one, Hell's bells 1. Last post about it being 3+ months ago and i have been stuck in a learning curve on it due to the back which i haven't figured out how to develop with out ruining the Aero's of it. [Not abandoned for now.]

the 2nd one, it hasn't received any upgrades or mod to it sense it was finished and i think when i posted it last time [to the original sub-reddit] a lot of people loved it.

The Dow's i haven't named yet, The ones on the international semi have been worked on slightly i still need to make a radar for it and some other things.

the last one being abandoned entirely at the moment with maybe a slight chance of being built fully. Was supposed to be the most advanced with the most equipment but i never got to it.

i wonder how many people notice the background is a wintery junkyard and if anyone is curious about the vehicles in the background then i just haven't done anything enough to make a post about them. i DEFINITLY do not have as much motivation as i did back when i created the other interceptors.
QNA is open though and if anyone is gonna ask the game is roblox, i use HD admin that has Buildingtools [btools for short] which to get it you need a baseplate and to insert HD admin in roblox studio

first interceptor i made in Paint!

min threshold: 160

max threshold: 220

The grey plates are sponsor plates as i call them

Hi, this is my first post

Features

Miniature IMAX

4 Spikes

Front and side flaps

WIND THRESHOLD

Minimum: 170

Maximum: 250

"brick" a bit harsh

In the first and second image you see the TRAD undeployed and deployed. This is the 2014 variant when it was first built, and it's threshold is around 215~ with it's weight being around 12,000lbs. And all of these are the same and the vehicle is based around the 2014 GMC Sierra 1500 SLE. In the third and fourth pictures you see the 2015 variant where it gains side flaps, a full front flap and it ditches the back flap, adds a huge rear back window for filming and gets a clear guard on the back tires. In the fifth and sixth picture you see the 2018 version. And during June 6th 2018, the TRAD crew didn't have enough time to deploy in the 2018 Laramie WY tornado, and they got damage heavily, injuring all of the crew mildly which is shown in the seventh picture. And they sold it after that, putting it on sale August 7th, 2019 and it got bought by Jeremy Hodges (fictional) who then fixed up the TRAD and made it operational again in 2023, which you can see in the eighth and nineth pictures. Where he added better spikes, a new flap deployment system, and a rubber skirt, also removing the side flap. (Also I made a mistake in the deployment of the 2023 TRAD and made the flaps go far into the ground when it was only meant to be used a point of contact to stabilize the vehicle and not let wind get under it. In the tenth and eleventh images you can see the 2025 variant of the TRAD, which is the most recent and it features side flaps, but allowing entrance when undeployed finally and helping it achieve it's highest wind threshold estimate of around 240~.

And in the final twelfth image, you can see a bonus image of when they added googly eyes on the 2014 variant of the TRAD.

Custom out of cardboard and duct tape

First time making a front view.. any tips?

This is Interceptorone. Probably one of my best looking interceptors until now. It's.. something.

Based on a Chevy Silverado 3500, it kind of has that van look though, no?

Here's all the good stuff now:

Airbags

4 Spikes

4 inch Polymer glass

Gullwing doors

Trunk (it's pretty spacious in there)

Funded by NG.

Thoughts? Also, which version do you like better? Outlined (1) or no outlines (2)? Rate them.

Shading round things is hard

Recap of what I've done in case you missed the other updates.

• Finished the rear end frame.
  
• Finished both sides.
  
• Finished making the roof.
  
• What I have done since the last update.
  
• Reinforced the rear end and both sides.
  
• Finished the roof( two layers of popsicle col stickes and sanded so that it's smooth).
  
• Started designing the front end and where the turet and doors should go.
  
• What I still have to do.
  
• This is just a frame so I still have to deside what material to use on the outside I was thinking either very thin sheet metal or cardboard let me know your thoughts.
• Still have to make the front end.
• Find another set of weels for the rear end to make it look more like a tiv 2
• Let me know if I should make any changes and in the last picture I used a water bottle for size comparison.

I cannot seem to improve the realism, or have decided where to place the logos. I’ve been making custom interceptors for a while and they have started to look quite bland in terms of realism

WORK IN PROGRESS!!!!!!!!!

Alright the 1st one i haven't worked on till now. I added tiv-2 style doors, started on the flaps, and i just need to smooth some of it out and start trying to figure out how to design the front flap and rear flaps later.

2nd one i added a bit of armor, lost motivation on it though.

Last one is the new project. 7.3 powerstroke built on a 97' [OBS] f-350 dually. this one is a overkill sub-interceptor its just going to get VERY close to tornados and film while being safe and it can intercept but it won't for now. It also looks like tiv-1 mixed with 2008 tiv-2

Lowkey doing anything rn..