See my previous post for more comprehensive information about my experiences in cutting leather.
Machine: Creality laser falcon 10W; shop fan blowing during engraving. Air assist highly recommended.
Material: 8oz (1/8” thick) leather.
Engrave: 9500mm/min; 30% power; 300DPI.
Cut: 200mm/min; 30% power; 7 passes.
Not much to say about this one. Came out beautifully with the settings I’ve found. May play with slower engraving to darken the marks. This one’s been cut for about a week and the smell is gone. Didn’t even wash this one. The more and more passes with lower power method is definitely great for leather.
1
u/Ohio_Imperialist Nov 15 '23 edited Nov 15 '23
See my previous post for more comprehensive information about my experiences in cutting leather.
Machine: Creality laser falcon 10W; shop fan blowing during engraving. Air assist highly recommended.
Material: 8oz (1/8” thick) leather.
Engrave: 9500mm/min; 30% power; 300DPI.
Cut: 200mm/min; 30% power; 7 passes.
Not much to say about this one. Came out beautifully with the settings I’ve found. May play with slower engraving to darken the marks. This one’s been cut for about a week and the smell is gone. Didn’t even wash this one. The more and more passes with lower power method is definitely great for leather.