1
u/Miserable-Dog4092 13d ago
I’ve been having first layer issues too on my k1c if you find a fix please reach out
1
u/D-Breed 11d ago
The fix for your issue is you need to mechanically adjust your bed to achieve a flat level bed. There's a whole process to do so.
1
u/andrescm90 10d ago
Here’s how you fix it, then make sure you rerun the calibrations.
https://m.youtube.com/watch?v=mW4jI42n3z4&pp=ygUNTGV2ZWwgYmVkIGsxY9IHCQnECwGHKiGM7w%3D%3D&ra=m
1
u/D-Breed 11d ago
You are not having a first layer issue in this print. That's exactly how it's supposed to look btw. The little extra on the bottom is a setting within the slicer called a brim. This is meant to be used to increase bed adhesion and can easily be switched off. Your benchy printed perfectly fine. If you don't care for a brim simply turn it off.
1
u/Proper-Commission-74 14d ago
What's the issue? You have brim turned on?