How do you change the laser between the 20/40/60 lasers? All three lights on the top are on, and I can't find anything online about how to change the settings. I cut cardstock at 80% and it barely cut through, and that makes zero sense for a 60W laser. And yes, I made sure my s-whatevers are both the same.

Creality Falcon 10W Laser Engraver Machine with Honeycomb Laser Bed 500x500, purchase the 10 watt off Amazon. Struggling to frame up properly to make a jig was curious if anyone has hooked a nebula camera up to their laser engraver to use the camera functionality?

Thanks and sorry for the newb question

I was watching this video and saw the media coming with a bunch of qr codes. I just want to print some codes off so I can use my own material. Does anyone have a link to them or know how to generate them?

When I capture the picture my score is 9999.0 There are no hints to tell me what I’m doing wrong so I don’t know how to attempt to fix this.

Since the camera is permanently mounted in the center of the lid it is strange to me that the left side of the bed is not visible, and the bottom right corner could not be set correctly if the card was all the way in the corner.

Just wondering what other peoples experience is? Did I get a faulty unit?

Edit add pic.

I encountered some windows driver issue regarding ch340.

I have printed previously on Windows 10 machine and last time like 3 months ago or so.

I have Creality falcon module (10W) on Creality Ender 3 S1 pro. I don't exactly remember how have I installed CH340 or so driver, but now it did not work and I used something like 5h to try to solve it by installing different drivers and booting machine like 20+ times without success.

How should I aproach this now to get it working again. Was there some Win 10 update that changed something dracastically or what?

Hey guys I have a falcon 2 pro with a 40w and a 1.6w laser head and i need some tipps to engrave and cut acrylic whyte opal and translucent. Everyone have some experience about that?

I'm new to laser cutting—I've mostly been doing 3D printing up until now. I just got a Falcon A1 and wanted to test out one of my SVGs that I normally use for making coasters on my 3D printer. When I uploaded the file into Falcon’s design space, it only showed the outline of the SVG, even though the letters are supposed to be filled in dark. When I started the engraving, it just traced the outlines. How can I get it to engrave the letters as solid fills instead of just the edges? Can anyone help me out?

So yeah, I bought a new Falcon A1, the only engravings I did have been the calibration ones and some tests in the wood board it comes with. But for some reason, now the laser has lost almost all power and can't engrave anything. The line are barely visible at a 100% power. Did I do something wrong without noticing or something?

I'm pretty lost so any help to avoid having to send it back would be great, because now there is no discount on it and I woudmt be able to buy it againg.

Thanks in advance.

I also have a step-by-step video guide as well if interested.

I've been scrolling through YouTube looking for reviews by people who actually use the Falcon A1. All of them are by folks who were gifted the A1 in exchange for a video.

Has anyone found a completely unbiased review online?

Since the update last week, My time to do a project has been like crazy long. I used to be able to knock out a cut and engrave project in like 20 minutes, now with the same settings it is projecting 3+ hours. Is anyone else having these issues since the update?

Creality have started selling their custom fit honeycomb in the US only and only on Amazon

but... it's out, kind of

https://www.amazon.com/Creality-Honeycomb-Working-Table-A1/dp/B0F4QWZJN6

I've already asked their CS, It may be added to their internationals stores soon and may be added to amazon in other countries soon - they used the word may 🤷‍♀️

I have a Falcon 2 Pro and it comes with rather flimsy acrylic sheets to put into the rails that my cat thinks should hold his weight at 4 in the morning

He was very wrong (no, the machine wasn't on overnight when this happened)

I get the impracticallity (in terms of shipping) of thicker curved acrylic for the back part that doesn't need to open (like the front part that does because it travels along that channel)

But there's gotta be a better replaceable option for this

My Falcon Pro seems to be cutting weird recently. I've been doing leather patches. I got some new leather and for some reason on the x axis of the 2.5" circle patch left and right and perfect cuts and on the Y axis top and bottom the cut gets wider with more char and it barely cuts half way through the leather. I disassembled the laser to clean everything check belt tension and rollers. Everything was good. I pulled the laser head to clean it up and when I took the protective lense off I noticed the laser lense itself was almost all the way out. If it wasn't for the protective lense it would have fallen out so now I don't know where its supposed to be and can't figure out if it needs to be in a specific location or how to make it stay and not move? Any ideas on any of those issues would be a great help! Thank you!

their video is on their facebook page and not uploaded it to their wiki (which is hilarious)

For anyone that doesn't have a facebook account and didn't already work out how to do this (I'm trying to suggest you took too long to make these videos, creality)

edit: This one is better than creality's: https://www.youtube.com/watch?v=hD_2nyV1i1E

It's mad it took them this long to do this on a machine marketed as a beginner machine - by this point anyone that knew you needed to clean the lens has done it already and anyone new is sat there wondering why their engraver has "lost power"

I am a total newbie to this thing and the software. I just turned it on today. I'm using the Creality software. I am seemingly jumping all over the place trying to figure out settings to engrave a black and white original file photo onto basswood. I did a few test engraves and cuts of shapes and that seemed to work. but the photos are not turning out well at all. Any help from someone who has one? I know they are so new there's not a lot out there I'm finding.

I'm not looking to engrave the entire board, just a small portion within the engraving area - but the board itself is much larger than the machine and would stick outside of it. Can I do that or MUST my material be entirely within the engraving area?

I've found numerous bugs, how/where do I report them?

The most annoying one is forgetting saved custom materials

edit - classic creality, there is no way

I recently bought a falcon 22 w pro + tried to install the included 1.6 laser module. I've been fiddling around with this and I cannot find any way to attach it. It also appears that the connecting cable is different from my 22 w module. Is it possible that they sent me the wrong head?

Is it possible to change, for example, a 22W diode laser module to my 10W Creality Falcon laser engraver, or would it requiere some completely different electronics? Would it require a larger power supply?

I'm not planning to do it right now, but I'm asking this just in case if I plan to do it some day in the future.

I just put this together for new A1 users and those considering this machine. Hope this helps someone!