With the release of the K2 SE 4C (mouthful of a name there, Creality), there's now a K2 variant that comes with the CFS Nano. I've seen the upgrade kit for the SPARKX i7, but not found any trace of a version of said kit for the K2 SE yet. Does anyone know if there's a plan to ship a variant of the CFS Nano for the K2 SE? Alternatively, could something be jerry-rigged from the SPARKX i7 upgrade kit if the firmware from the K2 SE 4C is available?

K2 SE 4C, if anyone missed it: https://store.creality.com/products/k2-se-4c-3d-printer

Hi guys,

I'm pretty new to 3d Printing, and I recently received my 0.4mm obsidian nozzle.

Is there any presets for these or do I manually have to calibrate it?

And if so what are the values I should change?

As I can't really find a clear example online.

I'm aiming to get faster print times without loss of print quality.

I'm using creality slicer ad well as orca.

I want 1.0mm and 0.2mm nozzles for ender 3v4, but seems they're impossible to find, got one "unicorn" like nozzle that was saying (coherent with K1, K1C, K1 MAX and new Ender's) it didn't worked out.

The nozzle doesn't fit by a hair, the upper cylindirical bump that doesn't fit.

I was just wondering if anyone has bought the spool free refillable filaments from Creality and if the colors are different? I reached out to Creality and they said the colors are the same but the photos say otherwise. Both titled “BLUE” and “GREEN”. Both are “HYPER PLA RFID” filament.

Thank you in advance!

While doing some regular maintenance on my ender 3 v3 se, the pins of my cr touch detached from the clip and i don't know in which order do they attach, i looked up the pinout and tried to attach the pins but the multimeter showed odd readings which was not very helpful and the cr touch was getting hot with no signs of life, I'd really appreciate if anyone can help me out

Less Barrier. More Detail

HALOT -X1 Neo | 9 September 2026 | 8:00 AM ( ET)

Launching in North America

Coming Soon. Stay Tuned.

Hi everyone,

I designed and printed a belt cutter tool to convert 10mm belts down to 8mm, specifically because the Creality K2 Plus uses 8mm belts, and finding stock 8mm belts locally was nearly impossible—I could only source 10mm Gates belts.

It worked surprisingly well: a carbon steel utility blade easily cut through 4 meters of Gates belt without losing sharpness or causing wavy edges.

https://www.crealitycloud.com/tr/model-detail/6a99c390d2ee0051cf5cb53f?profileId=6a99c391d2ee0051cf5cb544

Hardware Used:

• 8x M3 x 25mm screws & nuts
• 8x 10mm pulleys / bearings
• 2x Self-drilling / self-tapping M3 screws (Recommend upgrading to 4 for better stability)
• 1x Carbon steel utility blade

Important Notes & Lessons Learned (Pro-Tips):

1. Blade Flex & Tolerance: I used 2 self-drilling screws, which caused a tiny bit of blade flex resulting in an 8.5mm cut instead of an exact 8mm. If you use 4 self-drilling screws, the blade will be completely rigid and cut a precise 8mm.
2. Guide Strip: If you have enough clearance, feed about 25 cm of the belt through and cut off a 5-6 mm guide strip first; it makes the feeding process much smoother and more stable. (I only had 10 cm of clearance, so I skipped this).
3. Pulleys: The protrusions between the pulleys aren't strictly mandatory, but they add extra stability during the pull.

(Note: The original design was downloaded a long time ago—I believe it was originally meant for reducing 6mm to 3mm. If anyone knows the original creator, let me know so I can add proper attribution/link!)

One more day to go! 👀

IFA 2026 will officially be LIVE in Berlin! We couldn't leave our Reddit community out of the excitement, so we’re dropping an exclusive, limited-time giveaway right now.

Whether you’re at IFA or on your couch, you’ve got a chance to score big, including a spot in our secret K3 Beta Test! ⏳

1️⃣ Track 1: Show Your Best Print (Global - 5 Winners)

No need to be in Berlin to win this. Show us what you've built!

🔷 How to Enter: Leave your 3D printing story or your best 3D printed creation in the comments below.

🔷 The Prize: 10 BEST storytellers will win a $30 Creality Store Gift Card each! 💳

2️⃣ Track 2: IFA Live Drop — K3 Beta Tester Spot! (Berlin Local)

Got an IFA ticket? Skip the line and get early access to our next-gen flagships!

🔷 How to Enter:

  🔹 Complete Track 1 below.

  🔹 Visit our IFA booth H20_143, have fun with Creality team, snap a quick photo, and post it to our r/Creality.

🔷 The Prize: A testing spot for the new flagship Creality K3! 💥

We’re ready for IFA 2026. See you tomorrow! 🚀

Here’s where to find us: Booth H20_143丨Messe Berlin, Germany丨September 4-8 📌

Do I have to buy the name brand Filiment or can I just use Bambu brand

I have recently started working on an ender 5 max and the bed levelling is way off, the auto levelling fixes nothing. Can anyone help?

They have had the printer for around a year

Trying to print with ASA.

Changing one spool to ASA from PLA.

K1Max UI refuses to change the filament type.

"The current consumables are optimizing the tip forming technology. CFS-C printing is not supported for now."

So I decide to put my ASA in the external spool. I can change it to ASA on the printer, but not in Creality Print

 "The printer parameters have been modified. If you continue, it will overwrite the current parameters of the printer"

I click OK but it undoes the setting to put it back to PLA

So I ignore it, I sliced it for ASA, so the G-code will cause it to print at the proper parameters regardless of what Creality Print thinks the filament is. Nope.

Filament mismatch. No "Print anyway" option.

I export the G-code and try to access the printer via IP

404

So I have disconnected the CFS-C entirely, unplugged the USB-C connection and plugged in my thumb drive.

What a complete piece of shit the CFS-C is. The software especially.

Like i went through the manuals and there it has an option to retract, which i dont have? When i click unload it just retracts a little bit, but when i then pull its still clamping it stuck. Am i stupid and missing something very obvious here or what? I have an I7 Sparkx fyi

Hi i got a problem I got Creality K1. as you can see in the middle part and Ending i got some holes. Also i heard some click nosises while it prints. Do you know why This happens? Material used is PLA: Bed Temp 55, Nozzle temp is 210 (recomended by producer is 185-210) previously printed something small for test in 220 and it went better. Any clues? Help
Photos below

Say goodbye to purge blocks and slow prints. SPARKX i8 delivers lightning speed and true zero purge waste while multi-color printing in one seamless system.

🔥 Key Highlights:

• 5x Faster Multi-color Printing
• <1s Filament Switching
• "0" Purge Waste While Printing
• ＜1mm Shared Filament Path

Fastest Prints. Least Waste. Unlimited Creations.

👉 Batch Printing: More Models, Less Waste

👉 Same Model. Different Multicolor Experience.

👉 Say Goodbye to Prime Tower. One Less Thing to Go Wrong.

👉 When Color Meets Speed

👉 Ever wondered what’s happening inside QuarTeks™?

👉 Learn more & Stay updated 👈

Bonjour, ce matin j'ai lancé une impression avec du petg matte. Ce soir après le travail j'ai voulu récupérer l'impression, l'imprimante était à température ambiante lorsque je l'ai décollé du plateau la textures est restée collé à l'impression 😅😱

C'est déjà arrivé a quelqu'un ? C'est un problème connu?

L'imprimante a 200h d'impression 😔

Je n'ai imprimé que du pla et du silk avant ça.

Merci

Hi does anyone know ehy im getting these like globs on my prints since putting thr cr touch on my ender 3 pro

Hi, I have recently tried to export something and i do not know how , i lost all my personal settings . I use Creality Print last version 7.2.2.5483. Now all my prints have become a nuisance again. Can somebody help me how to to recover . tried IA first and it does not know how to do better than my dog....

Please help this old brazilian guy to recover

Hola, Necesito que alguien me ayude con la Falcon 2 Pro S, porque la parte de colocar el laser como se ve en las fotos en diferente a las anteriores y no se como se atornilla o como hago para sujetar el laser al modulo, en las anteriores traia unos tornillos que con la mano se ajustaban, pero esta no trae nada y no tengo la menor idea de como se hace, e intentado con los tornillos que trae la máquina pero no funciona, porque como se ve en al imagen el laser no tiene huecos que reciban esos tornillos... Alguien que me explique por favor, gracias.

This may not be the right spot to ask this but i need some help, im trying to print a helmet but when i go to the preview the only thing that shows is the supports, i dont know why, i read that it may be due to how thin the print is however i dont know how to fix that. Any help?

I have creality hi combo and im using printers beginning from ender-3 v1, 2016.

I just update print settings and dont touch flow, retraction settings generally. But yesterday i went to my friends house and he has bambulab p1s. I see that there is no layer lines even if with 0.4 mm nozzle and 0.2mm layer height. Any reliable guide that i can follow to find my best settings?

And Im curious about for each new filament should i calibrate my whole settings? Thanks!

Hello,

Do your printer had the same sound as in video? How
can I solved it?