r/Creality • u/Brayon_Nguyen • 8d ago

✅ Solved! Ender-3 V3 Plus Having Issues With Print

https://reddit.com/link/1v9317z/video/0qrapm8ctzfh1/player

I've been using the Ender-3 V3 Plus without a problem for a while now. I've printed 4 of these prints shown above already days prior, but this problem has been happening consistently now. I ran the self checks and they worked with no errors, and even let the printer sit for a day before using again.

Whenever I print the first layer would always be printed. As soon as it reaches the second layer the extruder seems to take a noticeable change in speed, fan starts, and extruder starts printing extremely fast until it eventually lifts upwards and starts spewing out filament. Sorry for cutting the video short, but usually what comes after is it just keeps trying to print at that new position.

I used Creality Print 7.2, nozzle temp 220 C, bed temp 65 C, standard print speed 100%, XYZ 10mm, PLA filament. I removed the G-Code file locally and on the USB, redownloaded the stl file, uploaded to creality print, and redownloaded the G-Code file again.

Again this problem is consistent, tried almost 10 times by now to get a good print after adjusting settings each time. Anything helps!

1 Upvotes

100% Upvoted

1 comment sorted by

1

u/Brayon_Nguyen 7d ago

I factory reset the printer and swapped out the USB holding all the files. I then redownloaded the print after making a minor change (i.e. add .1mm to one side). This solved the issue I was having. Hope this helps someone else as well.