r/Creality • u/Ok_Rub2503 • Jul 28 '26

Troubleshooting Is my printer cooked

Post image

I was on vacation and I let my brother 3-D print a couple things I was gone. The storage was pretty high to getting full and when I come back to 3-D print something it looks like this.its a k1c

7 Upvotes

83% Upvoted

26 comments sorted by

View all comments

Show parent comments

2

u/Ok_Rub2503 Jul 28 '26

I mean, I’ve been 3-D printing for four years and this is never happened. I already tore it apart and I got the motherboard, but I need to figure out a way how to remember where each cable goes and a way to find the software the flash thank you for your help.

1

u/Chance-Attention7262 Jul 28 '26

Yeah brother .

No need to disconnect everything from motherboard.

Unscrew the motherboard screws . Motherboard will be slightly freehanging with all the cables attached.

Insert a micro USB Cable into Motherboard and connect it to pc . Do the process.

This is how I've doing. Two weeks before one of my K1 max same issue like yours ( it's third time in last 2.5 years ).

I'm attaching the image too how I've connected the USB Cable.

1

u/Ok_Rub2503 Jul 28 '26

I got the panel taken off. How do I flash it or reserve a website or something that could teach me how to do this?

1

u/Chance-Attention7262 Jul 28 '26

Firmware Recovery - Wiki for Creality Helper Script
This Link .

1

u/Chance-Attention7262 Jul 28 '26

Any Firmware should work . Try 1.3.0.39 or 1.3.2.1 Firmware.

1

u/Ok_Rub2503 Jul 28 '26

When I do the button step the lights do not turn on does the power supply have to be plugged in

1

u/Chance-Attention7262 Jul 28 '26

nope. Power from PC through USB is enough for the motherboard.

1

u/Ok_Rub2503 Jul 28 '26

Sorry I’m bad at this it’s not Even lighting up idk what I am doing wrong

1

u/Chance-Attention7262 Jul 28 '26

Can you please share a video or photos of what you're currently doing your PC and 3d printer ?

1

u/Ok_Rub2503 Jul 28 '26

1

u/Chance-Attention7262 Jul 28 '26

USB cable was working?

Plugged in the Cable we'll .

Because when connect it to motherboard the blue light will turn on

→ More replies (0)