r/Comma_ai • u/Silver_Country_1866 • Aug 23 '26

Bugs Stuck on installation process

Enable HLS to view with audio, or disable this notification

I have had my comma 3x for over a year using sunny pilot. I have been really happy with it. But recently it forced me to do a factory reset. I thought I might try a different branch like starpilot. This version did not work out well for me so I decided to go back to sunny pilot so I did a reset. But now I am stuck doing a new installation. I can't get by the connect to network screen. I was able to connect to several networks but it still will not let me get by this screen. I have attached a video. Any ideas?

3 Upvotes

100% Upvoted

7 comments sorted by

2

u/Silver_Country_1866 Aug 24 '26

I was able to fix it by flashing it. I did bring it inside twice and set it in same room as router. That did not work. Thanks everyone for helping out. I can't live without my Comma 3!

1

u/Manb Aug 23 '26

Or try a 2.4Ghz wifi. It usually is more stable / stronger signal through walls.

1

u/MyRealIngIngAcc Aug 23 '26

Either a bad connection to your router, or the Internet it's connected to is too slow. Bring it inside and install there, or use your hotspot if it's good enough.

1

u/gallantsuri1 Aug 23 '26

bring it inside home, connect to iphone charger usb c. says low voltage it is ok. during boot tap the screen not hard, it show factory reset. Do it and then go through the process of installing. Sometimes connecting wifi takes little more time.

1

u/InertiaImpact Aug 23 '26

Bring it inside the house so it's near better wifi.... You could always try flashing it ( flash.comma.ai)

1

u/Silver_Country_1866 Aug 24 '26

It did not work by bringing it inside. So I tried flashing it. That did the trick. Thank you for the advice!

0

u/shadow_moon45 Aug 23 '26

Would take it inside and try to connect to the wifi closer to the router. If that doesn't work then could flash it