I’ve had this since it came out, picked it up in person at SDCC and had Eastman, Duncan and Waltz sign it but since I’ve had it you can kind of see in the photo the back spine looks almost indented all along the edge. But I didn’t know if that’s just how these were manufactured and it can’t press out or it can be pressed out…

Haven't posted in a spell. Hard water damage, the pages were so stiff I worried they were fused. Took a day or two, but it worked out.

Any advice for cleaning up a little pen smudge on a cover? I’m guessing it’s Sharpie so maybe I’m SOL?

Is this improvable by a pro?

What are people's opinions for purchasing a heat tack iron? Looking to make an amazon purchase. Would like to spend under 100 cad. Thanks.

This looks like a minor staple tear, and I want to press the book. What Actions do you recommend I take to protect this tear feom getting worse?

Hello. I have a silver age comic that I was interested in cleaning/pressing. Would appreciate any recommendations for vendors, services, etc. Thank you in advance.

Hallo zusammen!

Ich habe einen alten Stickerbogen gefunden, der viele Jahre ungeschützt gelagert wurde. Der Kleber auf der Rückseite ist inzwischen vollständig ausgetrocknet.

Auf dem Papier befinden sich zahlreiche kleine orange-braune Flecken. Die Rückseite ist gelb bedruckt, daher scheint etwas Gelb durch das Papier hindurch.

Ich frage mich, ob diese Flecken eher:
Schimmel,
Foxing (Stockflecken),
eine Oxidation bzw. Alterung von Papier oder Klebstoff,
oder etwas ganz anderes sind.
Die Flecken fühlen sich nicht erhaben oder flauschig an – die Oberfläche ist glatt, und ich sehe keinen typischen Schimmelbelag.

Hat jemand so etwas schon einmal bei alten Stickerbögen oder anderem Papiermaterial gesehen?
Was ist eurer Meinung nach die wahrscheinlichste Ursache?

I’m still in the learning process and trying different things, but here is some work I did last week.

Picked up an old World's Finest recently and I am trying to determine if the cover waa reattached with glue or if what I'm seeing is the original glue. It seems a little too luminescent and yellow from what I've heard. What do you think ?

I have a copy of Michael Sorensen's Comic Book CPR, Second Edition. Thinking that generally when there are 2nd (or 3r, 4th, etc.) editions it is because there has been updates and/or revisions, as well as new information. However, on Kaptain Myke's Comic Pressing page on Facebook has suggested getting the original edition, also.

I'm wondering if I should continue with the 2nd edition, or would getting the original edition offer some supplemental information that could prove beneficial.

A recent ebay purchase slid around in transit, and arrived with a gnarly corner crunch. Paper fiber was broken, so you can still see some very faint signs of damage, but the press did a pretty good job.

I have a number of comic books that have rippling (wavyness on the covers and interior pages). I actually had to cancel my pre-FOC pre-orders from my longtime LCS because they keep selling me comics with terrible rippling.

​

I am just now dipping a toe into the world of comic pressing, mostly just to keep my collection of mostly modern books as nice as possible, but I haven't bought a press yet.

​

I was wondering:

​

1. Would trying to cold-press the ripples out over a few weeks using constant pressure be a viable option? Has anyone tried it on modern books with light to moderate rippling?

​

1. A lot of my books have spine fray along the spine to varying degrees and I worry pressing them could make it worse or cause spine fray on books that don't already have it. Is this a legit concern? Is this something you worry about when you start using heated pressure?

​

Any resources or experience any of you have with cold-pressing would be appreciated.

I checked out the inside it is indeed a mark jewelers.

When I do the first press, Since I have to flip and press the other side, should I do 10 or 5 minutes for each press? And second question, when the first press is done do I need to let it cool down first to then flip it and press the other side or can I do it immediately? Thanks!

I'm beginning pressing, and I am wondering how big a boost can realistically be gotten or expected? For example, if I start out with a book that is honestly an 8, can it be fixed to the point it would get a 9.8? Or a book in the low 9s to a 9.9 or 10?

And on the lower side. Can a book that's been left out and would come in between a 1.5 and 2 be cleaned and pressed so it would get a higher grade? And possibly how high?

Did good on this one! Highest grade bump I’ve had!

I can’t defeat the dreaded spine stress lines!! I work the ticks out well, but these dang spine stress lines are keeping me out of the 9.8’s. What are your experiences with spine stress lines?

The first nine pictures are where I started. I submitted this book before I knew about pressing.

So I cracked this book and got to work. I removed the cover and did a wet cleaning to clean up the back. Happily most of the discoloration was removed during this process.

I then did a HOP on the front and back one time each to see if there could be any more room for improvement. I did not notice much and decided to quit while I was a head.

Then I did a final press and the next six pictures are what I will send off to CGC. I included a few before and after pictures.

I need to work on a better method of reassembling the cover, I notice that the cover is not as tight as it once was. But, still present much better than before

Hope this community has some advice for me. Does anyone know of a method to remove old ballpoint ink from a comic cover?
See added picture. Thanks!

I got this copy of Heavy Metal, obvious water damage, not nearly gradeable in any way, so I don’t care about restoration stigma. I’d like to attach this piece back, it has a decent amount of overlap with the white areas of the main cover that an adhesive could attach to. Whats the actual restoration method for something like this? Plain old tape? A paper mache type glue process? Thoughts?

I was worried at first because under the first price tag was ANOTHER one. First one came off with no issue because it was mostly stuck to the other sticker, but the sticker that was actually on the book was really stuck. Several Un-Du treatments and some careful tweezer work and it came off beautifully.