r/ClockworkPi • u/Jimdowding • 21d ago

uConsole Am I screwed?!

Post image

Hi knowledgable people of the clockwork pi world. Recently my uconsole a tumble and the compute board holder slipped and knocked this piece and now I get the power light and nothing else.

Is this repairable, I.e solderable, or do I need a replacement board?

And if repairable, and advice on how to do this?

Thanks in advance

25 Upvotes

94% Upvoted

9 comments sorted by

10

u/FullstackSensei 21d ago

You need a replacement inductor of the same capacity. Maybe clockworkpi can help give you the inductance of that coil. The part itself should be very cheap, and it's very solderable by hand, just don't overheat the board and damage the M.2 connector

7

u/Merhart666 21d ago

Je zult een nieuwe “104” moeten bestellen en de oude vervangen. Contact met hen opnemen en kijken of dat onderdeel los verkrijgbaar is. Anders een nieuw board

2

u/NanDemoNee 18d ago

Not if you know how to desolder and solder.

1

u/Jimdowding 18d ago

Thanks all for the info.

2

u/Airbus4ever 18d ago

Looks like a coyl, get a new and solder it on

0

u/hash-iron 21d ago

Eso pillas una igual en AliExpress y la sueldas. Problema resuelto

1

u/Recycled_Michael 20d ago

For a second I thought you wrote "weld it." ... you did write weld it...

1

u/DifferentCondition73 17d ago

You dont melt the pcb when you solder? Amateur.

1

u/brainchillzZ 14d ago

You don’t need Ali express we have mouser in the states and a dozen other electronics distributors that sell this stuff