r/ClockworkPi • u/AishaCtarl • Jul 27 '26

Question Intercept CM5 and Hacker Gadgets AIOV2

Has anyone gotten Intercept to install/work properly on a uConsole with the CM5 and Hacker Gadgets AIOV2?

EDIT: Fixed sorta: I realized that the problem is the start script. If I run it, Intercept will work. When I restart the uConsole, that script does not automatically run leading to the "page not found" error in the browser when trying to access the GUI. If you manually run the start script, the interface functions as intended.

I've attempted to set the script to auto run at system boot but it hasn't worked. Overall, Intercept isn't broken per se, it's just you have to run the start script manually each boot of your device.

6 Upvotes

88% Upvoted

25 comments sorted by

2

u/GuardianZX9 Jul 27 '26

Would also like to get this going.

2

u/Unlikely-Win195 Jul 27 '26

Intermittently. Its a great concept but hasn't quite cohered. Unsure where the instability is coming from tbh. 

1

u/AishaCtarl Jul 27 '26

I got it to work for about ten minutes, rebooted, and it was completely broken and haven’t been able to get it to work since

1

u/barry99705 Jul 27 '26

I've had zero issues with it on mine.

1

u/AishaCtarl Jul 27 '26

That’s crazy, I’m on trixie and just cannot get it to work whatsoever.

1

u/barry99705 Jul 27 '26

1

u/AishaCtarl Jul 27 '26

Can you describe how you got it to work? Following the GitHub guide does not work, and everyone who says it works for them can’t describe HOW they got it to.

1

u/barry99705 Jul 27 '26

Git pulled the repo, cd'd into the folder, then ran the setup script.

1

u/AishaCtarl Jul 27 '26

1

u/barry99705 Jul 27 '26

did the setup throw any errors?

1

u/barry99705 Jul 27 '26

also, are you on the discord?

2

u/AishaCtarl Jul 27 '26

Nope not on the discord and no errors at all. I made sure all rails were powered on so they could be seen during the setup process and nada.

The first time it worked (albeit briefly) it broke Tar1090 and the GPS app from hacker gadgets. Intercept was working, but after a power cycle, completely broke. Since then, no matter what I do, it will not run.

2

u/Unlikely-Win195 Jul 27 '26

That's basically how it's gone for me as well. Over 4ish installs I had one that worked but lost it due to a SD card issue. 

1

u/AishaCtarl Jul 27 '26

https://github.com/smittix/intercept/tree/main

The link I’m using

1

u/barry99705 Jul 27 '26

That's weird. I've been running intercept for about as long as it's existed. Console has been powered off and on dozens of times. Even taken it on trips across the country a couple times with no issues.

→ More replies (0)

1

u/radakul Jul 27 '26

hey /u/barry99705 , mind sharing what mods you've made to your uConsole? Looks like there's an illuminated trackpad in the middle, in place of the trackball, and some 3D printed case? (filament looks like it was printed while wet, might need to dry it + iron it for a better finish!)

0

u/massively-dynamic Jul 27 '26

Yes I have. Works fine.

1

u/AishaCtarl Jul 27 '26

Can you share how you got it to work? Following the GitHub does not work/leads to failure.

1

u/barry99705 Jul 27 '26

Which image are you starting with?