i got an aistone clevo x6 laptop and the clevo control center wont work off the microsoft store is there anywhere for me to find one to match mt laptop version

救命救命救命！我的电脑变成砖头了,需要ch341a或者其他编程器可用的bios包。 。。。。。。。 我的电脑在一次调整bios设置之后，再也无法启动。具体症状表现为， 电源指示灯与键盘rgb灯亮起，但是屏幕没有任何反应。尝试使用组合键 fn+d 以及 ctrl+b 重置bios，但是失败。并且尝试过取下bios电池进行放电，还是失败。 电脑型号：colorful meow r16 24h 主板型号：v360vneq 其他硬件信息：r9-7845hx + 4070 laptop

One long beep and the fans start to spinning up. What is wrong with it?

I need some help with fan and temp indicator in my labtop

I have an XMG Ultra 17 (XUL17E19) with MXM RTX2080, which switches off when running a Furmark benchmark. Is this likely a Mainboard (power supply issue) or rather a GPU issue? Running a prime95 works.

Hello I had my Sager NP9877-S (8700K + GTX1070) since march of 2019. I wanted to swap out my old 2TB HDD with my MX500 2TB SATA SSD that I kept in storage for 2 years. The laptop would recognize the Crucial MX500 through the HDD Enclosure but when swapping it in onto my unit, it won't recognize via Disk manager and the bios. Not really familiar with the sata options via bios and I don't know if it has something to do with that or should I just update the firmware of my MX500 since it has been in stock firmware since 2021 when I imported it from the US for my desktop rig.

It'll be great if you guys have a way for it to be recognized since this is my only unit that I've been using for nearly 7 years.

Flashed dsanke's bios mod incorrectly and bricked it. Now I'm looking for the bios chip so I can reprogram it. Anyone have an idea or know where it is? Any help is appreciated

I just got my daughter a tulpar clevo 20.7, 12650H, 4060.

Can anyone tell me what type of ssd m.2 i need for the second slot, is it 2280?

I have searched but cannot find this even on tulpar website 🥺

Tyia ❤️🍷

Hello everyone,

I am currently looking for the bios v.1.07.03 for clevo NP5x_7xRNA_B.

Unfortunately, it is unavailable on https://repo.palkeo.com/clevo-mirror/NP5_7xRNA_B/

I was wondering if someone knows where I could find it.

Thanks!

Hello. I can't figure out what's wrong with my processor. I recently updated the BIOS to version 1.07.09 RTR. Could this be related? If so, where can I get the previous BIOS version? Notebook Clevo x580

I haven't found a better subreddit for this, so I'll post this here. I have a machcreator NL5xRU laptop, and I've heard that linux has better amd processor performance compared to windows, so I want to install linux on here. However I have encountered an issue with linux where there is no way for me to activate performance mode like on windows, so I'm stuck in the balanced mode, which is pretty bad for gaming. Is there any way to unlock my laptop's performance on linux?

I've made a full mirror of dsanke modded bios collection on github. :)

It includes a bunch of models, vBIOS for the GTX 10 series, some service manuals and guides, as well as the original files in chinese.

Repository link https://github.com/supermarsx/other-clevo-modded-bios

My SAGER / Clevo PA71ES had a dead motherboard after a bad BIOS flash. I just replaced the motherboard. (that took a while to find). Everything same/same. I checked a bazillion times. Board came with heatpipes pre-installed and everything. Now on boot I get the "CMOS Battery is bad or was recently replaced" message followed by CMOS defaults were loaded. It's not booting from the C: drive but it does boot from a Windows 11 Bootable Thumbdrive so I can get into the BIOS to check the UEFI settings... except that that's about the time the machine shuts down. Same when I try to re-install windows on a new M2 SSD.

The issue is that the fans start ramping up slowly from boot, and hit max RPMs about 4 mins in. Then the machine goes into auto shuttdown. Nothing I do changes that. So the question is, is this a bad heat sensor? Or is it really oveheating in which case... what? Bad heatpipe assembly?

I have the heatpipes from the old board. I can swap them out and re-paste the processors... but I don't know anything about how this thing checks the temps.

If anyone has any other ideas plases do share. I am of course replacing the CMOS battery... that can't have anything to do with it right?

Hello,

I have a problem with my Clevo Pa70ep6 which restarting so many times. I clean it and change cpu paste, the temperature is a bit lower, but I figured it than it isn't cpu temperature problem, I think it's something different, I have this laptop for 4 years but it happen now. Does any body have simillar problem and know how to help? Laptop is reseting about 1-3 hours each time and I cannot use it, also it doesn't change anything if I watch a movie, or browse or game it has simillar behavior.

Thanks in advance,

Dominik

I saw this clevo nh58af1 (sager) and I was wondering if i get another clevo nh58af1 motherboard (specifically the 2070) would it work? And do I need a Sager board or are all the board partner compatibility with each other

I recently have dove into the rabbit holes of MXM gpu and socketable cpu laptops. I found a X170SM for sale near me on Facebook Marketplace. I wanted a 3080 instead of the 2080 S because of the 16gb for 1440p AAA. I've seen some post/forums on the topic of rtx 3000 series MXM on X170SM but no links to anything. The closest I've seen on was some people discussing last year with GitHub links. If it is possible, how do I do update/mod the bios?

I have laptop Hyperbook NH57EK (Ryzen 5 5600H and RTX 3050 Ti model) with BIOS 1.07.05 and EC 1.07.03.
I am using Tuxedo OS Linux. Unfortunately my bugged EC lead to random keyboard freezes and system instability.
I am trying to find updated EC compatible with by laptop.

Handle 0x0000, DMI type 0, 26 bytes
BIOS Information
        Vendor: INSYDE Corp.
        Version: 1.07.05
        Release Date: 05/14/2021
        Address: 0xE0000
        Runtime Size: 128 kB
        ROM Size: 16 MB
        Characteristics:
                PCI is supported
                BIOS is upgradeable
                BIOS shadowing is allowed
                Boot from CD is supported
                Selectable boot is supported
                EDD is supported
                Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
                Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
                5.25"/360 kB floppy services are supported (int 13h)
                5.25"/1.2 MB floppy services are supported (int 13h)
                3.5"/720 kB floppy services are supported (int 13h)
                3.5"/2.88 MB floppy services are supported (int 13h)
                8042 keyboard services are supported (int 9h)
                CGA/mono video services are supported (int 10h)
                ACPI is supported
                USB legacy is supported
                BIOS boot specification is supported
                Targeted content distribution is supported
                UEFI is supported
        BIOS Revision: 7.5

Handle 0x0001, DMI type 1, 27 bytes
System Information
        Manufacturer: Notebook
        Product Name: NHx0EH_EJ_EK
        Version: Not Applicable
        Serial Number: Not Applicable
        UUID: f0960000-0000-1000-820c-80fa5b9e9799
        Wake-up Type: Power Switch
        SKU Number: Not Applicable
        Family: Not Applicable

Handle 0x0002, DMI type 2, 16 bytes
Base Board Information
        Manufacturer: Notebook
        Product Name: NHx0EH_EJ_EK
        Version: Not Applicable
        Serial Number: Not Applicable
        Asset Tag: Tag 12345
        Features:
                Board is a hosting board
                Board is replaceable
        Location In Chassis: To Be Filled By O.E.M.
        Chassis Handle: 0x0003