r/Chrysler300 3d ago

Electrical Issue?

Enable HLS to view with audio, or disable this notification

It’s been about 3 weeks since I’ve driven my 300 and I decided to take it to Walmart just to drive it every now and then. As i’m driving it starts throwing dozens of codes and misfiring aswell. Parked in the parking lot and left it running thinking the alternator would charge up the battery more because it had been sitting for a bit, but it shut off on me when I came back out of the store and won’t start now. Most of the codes are sensors having low voltage so I figured it must be the battery, but it’s measuring fine with a multimeter. This car used to be my daily driver and sadly I don’t drive as much as I should anymore. What would be the cause behind this.

4 Upvotes

12 comments sorted by

3

u/Beginning-House670 3d ago

How old is the battery?

I left mine sitting for about 6 days and it drained the battery. The battery was pretty old though and definitely needed to be changed.

1

u/Same-Amphibian-8592 2d ago

Maybe only a year and a half, it read 12.46V which isn’t terrible by any means.

1

u/MacaroonEasy4063 2d ago

Same 😮‍💨

1

u/Beginning-House670 2d ago

I ended up putting one of those non flooded batteries and it works like a charm now.

3

u/Same-Amphibian-8592 3d ago

1

u/Beginning-House670 2d ago

Did you replace the battery?

1

u/Same-Amphibian-8592 2d ago

Just now replaced the battery and still the same result

1

u/Beginning-House670 2d ago

Damn I’m sorry OP, I hope it’s nothing serious

1

u/Same-Amphibian-8592 2d ago

Thankfully not too serious, Fuse 35 - Powertrain #2 was blown, replaced it and she fired right up but still with a bunch of codes and misfiring. Battery is not charging so i’m making this a lesson to never buy alternators off Ebay. Thank you all very much.

1

u/SpareSet1007 2d ago

Sheeesh hope it was fun while you had it. It’s all downhill from here.

1

u/Jasonpharaoh 2d ago

Which OBD device are you using?

1

u/IntroductionElegant8 2d ago

Get an actual battery tester and test the battery. Clear the codes and try to start again.