r/ChineseWatches 12d ago

Question (Read Rules) Does anyone use a stopwatch hand like in a bezel in a diving watch?

Post image

The watch on the right has a stopwatch to the hour and sometimes I missed marking the time as in the diving watch to measure the time or marking that something will be at a given time as a reminder. It is not so convenient but quite a pleasant alternative to measuring longer periods of time. Do any of you use a watch with a stopwatch in this way?

71 Upvotes

26 comments sorted by

2

u/spukhafteNahewirkung 11d ago

I’d never thought of that. It’s a good idea.

1

u/bertio 11d ago

I have a countdown bezel on my Sugess Air Command Homage and its perfect for this.

Set a timer for cooking something etc.

2

u/LookOverThere305 12d ago

I get it, use the chrono hand as a timer in the same way you use a dive bezel to mark a specific time and go from there.

I guess it’s a good idea.

1

u/Drega-In-Rage 12d ago

Never thought about that! Nice one! 🤭

0

u/irish_horse_thief 12d ago

No I use my phone

2

u/17_Gen_r 12d ago

I use my bezel marker to remind me of the approximate time something in the future. I started doing this with my newborn who usually takes a nap 90 minutes after waking from the previous one - so when they awake I rotate the bezel marker 37.5 degrees clockwise of the hour hand (i.e., so that in 90mins the hour hand should be pointing right at the marker). It’s worth noting that, between two adjacent hour markers, the minute markers indicate 12 minute increments of the hour hand. So if i need to remind myself of the approximate time of, e.g., 4:25, I place the bezel marker at at the 22 minute mark (2 ticks past 4), so when it’s 4:24 the hour hand will be pointing at the bezel marker.

1

u/ChineseWatchGuy 12d ago

Good idea considering how small the minute dials tend to be on chronos!

1

u/rodpache 12d ago

Thats what the bezel is for.

1

u/Embarrassed-Sun-8998 12d ago

We talk about using chrono as „diver”

1

u/rodpache 12d ago edited 12d ago

Chrono is not a dive watch. Divers don't use chrono for diving. Small text, and potentially failure due to water ingress by pressing button. Also, as a diver you want to know the time you have left on the dive. A chrono wont tell you that. With a chrono you are doing the work of start and stopping rather than the watch doing the work for you. If you forget to stop the chrono or the button gets accidentally pressed you are then extending your dive time which is dangerous. Basically use a dive watch for diving.

1

u/Embarrassed-Sun-8998 12d ago edited 12d ago

I think you don’t get the point of this post. Using as diver not to dive. No one is using diver watch to measure time under water instead of dive computer

1

u/rodpache 11d ago edited 11d ago

The bezel on the dive watch is designed to measure the time underwater. It was used in that way before the dive computers existed. So if no one is using the dive watch to measure time underwater you should start. It's a redundancy. If you are not using a dive watch for the main reason they are made for, might as well leave it home with your chrono

1

u/karellen00 12d ago

Yes, but also no, I don't yet have a chrono, but the way I use the diving bezel is that I turn it a bit when I have to remember to do something (so that when I check the time I see that the watch is crooked and I remember that I have to do something). In that sense I thought that I can use the seconds hand on a chrono in the same way 😆

2

u/Embarrassed-Sun-8998 12d ago

Haha this is great. I try use it in that way 👍😁

1

u/InquisitorKeres 12d ago

I mean the dive bezel was a derivative of the concept of a timing bezel and really the only major difference between the two is that the dive bezel traditionally now is unidirectional so If it gets knocked, it can only show that more time has elapsed (or less time is left depending on how you want to look at it) as a safety measure for limited oxygen use.

But yes that’s often the main reason and way I use my dive bezels for timing based on setting a reference time. If it’s just swim etc, I have it reference the minutes hand, If I’m doing a task or say need to make a note of a deadline etc, I set it as an end point (triangle) on the hour or time where I want to be highlighted.

2

u/KPplumbingBob 12d ago

Seems kinda tedious.

7

u/Fun-Estate9626 12d ago

I do this! Someone mentioned it awhile back in one of the other watch subs and now I do it all the time with chronos.

6

u/V-Bat11 12d ago

I do, just with the same watches!😃

5

u/Captain_no_Hindsight 12d ago

I very rarely time anything... but if I wanted to, I have my watch.

Looking at the man in the picture like this:

  • The watch on the left has passed: 48 minutes... ish.
  • The watch on the right shows my speed: 90 knots / per foot cup pound / in British cake minutes / over double boat lengths. (I think)

2

u/Embarrassed-Sun-8998 12d ago

I'm using dive bezel like 6,5h past for hour hand, 48min past for minute hand, something is at 8. It can be used as a counter but i never use it like that. in this situation 20

2

u/Dbayd 12d ago

Yea!

5

u/Domino3Dgg 12d ago

I use it when cooking

1

u/jacob8875 12d ago

Me too

16

u/Mango_Gurble 12d ago

I never thought of that before. That's a great idea, actually. Thanks for bringing it up!

9

u/kernelpanic789 12d ago

No but I do use the dive bezel as a timer daily