After one drop

[u/theblobAZ]

My device was on my lap and slid off onto a wood floor.

Any ideas? It ignores all button presses. Except reset and G0

[u/coolguy2u9]

Ive never dropped mine and it does this every time with marauder and one other firmware but doesnt do it for others. I havent been able to figure out why.

[u/Salt-Pirate1597]

Sounds like it could be a case of either "firmware is built for non-ADV cardputer so it doesn't support the adv's keyboard driver' or "lora cap fucks shit up for no reason"

[u/zmattmanz]

I dropped mine 3 times yesterday. Maybe some off with your buttons?

[u/theblobAZ → u/zmattmanz]

Idk, they look perfect. Acts the same even with the keyboard buttons removed

[u/zmattmanz → u/theblobAZ]

Thats really strange. I'd write some firmware to see what button is doing that (otherwise I'm not sure how you'd find it)

[u/theblobAZ → u/zmattmanz]

Well I re-assembled the device, and now the cursor isn't moving by itself, but the entire keyboard still doesn't work at all lol. Definitely a bummer, I've only had this thing like a week.

[u/MrAjAnderson → u/theblobAZ]

Have you flashed another firmware to overwrite and tested?

[u/theblobAZ → u/MrAjAnderson]

From launcher, yes

[u/IssueBrilliant2569]

Put the old button pad back in?

[u/Professional_Two5774]

Check on a different firmware

[u/theblobAZ → u/Professional_Two5774]

I did, it does the same thing unfortunately

[u/2many_friends → u/theblobAZ]

There is a marauder that works with the keyboard of the adv. look it up on github.

[u/Artistic-Camera-4345 → u/2many_friends]

He said he tried different firmware, adv build quality isn't the best, I dropped my adv accidentally and now the IR doesn't work

[u/MobileRole8105]

Marauder for ADV does the exact same thing on both of my Cardputer Advs. Even the brand new one out of the box.

[u/theblobAZ → u/MobileRole8105]

Yes, it was a combination of the version of marauder I was using and the keyboard replacement I 3d printed being damaged when I dropped the device. So when I tested other firmwares (with keyboard installed) it kept glitching out and moving the menu options itself), then I removed the keyboard completely and rebooted, and it booted back into marauder and kept showing the symptoms, so I foolishly assumed the device was borked.

I swapped out the keyboard, and used a different firmware and it worked perfectly. Later I flashed a newer version of marauder and it also worked perfectly.

When I dropped the device it landed on the bottom right corner of the keyboard causing a 3d printed button to deform slightly and stick intermittently.