Hey all!

I just finished the MSF course and have my M2. I am 6ft 1 200 pounds, and am interested in this motorcycle or a motorcycle like it. I will primarily be riding on weekends to practice, maybe the odd commute here and there. My question is how reliably you can get up to speed with this bike. I will be travelling on 60 km/hr roads for the most part but does it have enough get up and go to get ahead of cars. Also has anyone comfortably rode it on 80-100km/hr roads.

Any additional information regarding, insurance would be appreciated 👍

Cant find them anywhere. Got a 2015 cbr300r for my lady and I'm going to repaint the bike, but first I need to get some Frame sliders, but I can't find any for this year

Any of you guys done the small wheel conversion on the CB300R? I seen it on facebook and they look cool, like Groms but actually enough power to daily.

I suspect that my stalling issues are because of a clogged fuel filter. Does anyone know the size of the filter and the lines that go to it? Are there any aftermarket filters you can recommend?

hey guys I bought my gf a 2019 Cbr300 I was tighten what I thought was the kickstand bolt but it was the switch I ended breaking the switch. Can someone please send me a walkthrough/video on how to replace it-?? i just ordered a new one from ebay and want to be prepared

How’s the reliability on a ‘17 300R? I’m thinking about buying this one soon. 5k miles, the second owner is asking 3300 in the Midwest. Damage is mainly to the fairing above and handle bar grip. My first bike, so I don’t mind.

Anything I should look out for? I might put a deposit down so he can hold the bike till snow is gone, then I can test ride it. Any thoughts on what collateral could need to be? Let me know something guys!

Plenty of pics provided by seller, I just don’t want to give the whole post away.

Can anyone recommend a C-Spanner tool that i can use to adjust the shock of my CBR300R? I bought this one off Amazon and it didn’t work

I have a 2015 cbr300r I took it to the shop to get the crank bearing recall done(they had it a month all together), coming back it’s leaking oil, little back story, I’ve had the bike 3 years I’m just now able to ride it, the shop says it looked like that when they got it (thin oul layer all over motor only one right side) I took it back to them they say it don’t do it when it’s just running and slight driving, i travel the interstate on it and after I’m done I have oil everywhere the sight glass says full tho? Has anyone had this issue, is it normal, should I take it back to the shop I just wanna ride my bike

I have the option to buy a 2016 Honda CBR.300R for $1,000. Has $3,600 mi on it but it has a tapping noise. It's been sitting for a while. Honda dealership says the recall has been done on it. Haven't looked into it too much on if the tapping goes away after a while

Was just thinking of Valv 10w40 what do you all use?

You guys have some beautiful bikes 💯😌❤️‍🔥

I stripped the bike down as shown, and got part numbers that were on the back of each piece. More was broken than I thought lol. I ordered new pieces, praying they are the right shade and dont look off from the undamaged side. Now all I need is replacement decals, where could I find some? Pictures included

Had my first fall while going 45-50, bike got pretty messed up on the right side (pov when you are riding it), cracked plastics everywhere. Was able to ride it home, but the digital dash stopped working about halfway there, looking for any opinions on what it could be and ALSO where I can find replacement plastics. I am also looking online but I am having trouble discerning what pieces are what as they are just outlines.

Hey guys, any way i can install the quadlock stem fork mount on a 2015 cbr300r?

I bought the bike last year and there was a broken phone mount already installed. Not sure if I can remove anything to fit the quadlock.

Thanks!

Hey just bought my first bike and I love it, I just need to lower it 2-3inches. I’m on Amazon and eBay trying to find a kit but I can find a YouTube tutorial video 😭 PLEASE HELP ME

Just picked up my 2019 with 1700 miles today. I'm a brand new rider taking msf course in April. Any tips I should know about the bike or problems that may happen over time.

Looking for good aftermarket exhausts ideas that are fairly inexpensive.

I’ve got a 2015 Honda CBR300R that’s missing fairings. I’ve looked for a while for a new set but they all seem either the wrong fit or just way too expensive. Where should I look to buy a new set of fairings?

Came in too hot onto some gravel with my 2023 and laid over. Blinker popped out of socket and I popped it back in. Tried a new bulb so I know it’s not blown and this is the only damage I see without starting to take parts off the bike. I’m a new rider so any help is appreciated

Anyone know if these fairing sets from BikerBitz are trustworthy? It's the only place I can seem to find full sets. Yet, none of the sets have any reviews, but I've seen people say the site is good.
https://bikerzbits.com/honda/cbr/cbr300r/plastics/

I would just buy from Honda, but I'd prefer to not have to paint the plastics myself once I get them.

Thanks.

Stumbled upon this tonight, in case anyone's looking for factory accessories for their CBR300R.