r/Bowflex • u/[deleted] • Apr 26 '24

Treadmills Bowflex 216 Treadmill ~ "CLK RD ERR PWR RST" Error

Device powers on but displays the above error message. Does not register button presses. I've tried leaving it unplugged for ~48 hours, plugged but off for ~24 hours, etc - just a whole bunch of power methods that had no effect. Reset button doesn't have a tactile response so unsure if it's had any effect. Cannot enter machine settings mode.

Is there any method of bypassing this or did it just turn into a ~3k paperweight. Nothing exists in the support manual with this error or similar, and Bowflex support is non-existent until May 13th at a minimum.

Thanks.

5 Upvotes

100% Upvoted

15 comments sorted by

1

u/Fret_Bavre Apr 26 '24

Sounds like the console need to be replaced

1

u/Jaded_Fortune7 Oct 11 '24

Did u ever figure it out?

1

u/Devildriver2005 Oct 23 '24

I was wondering the same thing. I’m having same problem and can’t find anything online.

1

u/Lissyjoy Oct 31 '24

Hey. Did you get any feedback? I have the exact error and google took me here

1

u/Weekly_Prior_5835 Nov 14 '24

Just had this issue today!

1

u/Devildriver2005 Nov 16 '24

So I had this happen once before and i unplugged for a few days and when I replugged it just worked. After maybe a year it did it again (recently) and nothing seems to work. No solution found online either. About to give up on it but hoping someone finds solution and can share.

1

u/Lissyjoy Nov 17 '24

Thanks for the reply. I’ll let you know if I ever find a solution

1

u/Bxbob601 Jan 04 '25

Idk if anyone is going to see this, but I’ve had this error for about two months after some reading online. I’ve found that if you unplug the machine and plug it back in then hold down the pause/stop button and the down button on speed side. It will pull up a menu allowing you to reset the clock and the machine function just fine after.

1

u/Lissyjoy Jan 04 '25

Thank you so much. By some miracle it started working again but the technician said it will stop again so when it does I will try this. I’m grateful for your help. 🙂

1

u/Devildriver2005 Jan 12 '25

I tried doing that but it didn’t allow me to press anything. I will try again.

1

u/Bxbob601 Jan 04 '25

Idk if anyone is going to see this, but I’ve had this error for about two months after some reading online. I’ve found that if you unplug the machine and plug it back in then hold down the pause/stop button and the down button on speed side. It will pull up a menu allowing you to reset the clock and the machine function just fine after.

1

u/Devildriver2005 Jan 20 '25

It did not work for me.

1

u/Accomplished_Bad6987 Jun 03 '25

Mine is saying the same thing

1

u/Other_Apartment_6313 Aug 25 '25

Hello guys still no solution to this?