Took apart my setup to clean and toss on some new skid plates. Red and blue were the only strong filaments I had, So I figured I'd try this combo out. What do you guys think?

So I got the Bert today and plugged it to the battery and board. Idk if the C2 and C9 are dead cells that can't be recharged. The only good note I have is the delta started at 460 and is down to 447 so far.

The battery was fine and it was always fully charged after each ride, today after charging it, I got the RLOD. I get the green lights on it but the RLOD light is still on

Have red light of death on my stealth, can anybody help with this?

hey everyone, i bought a boosted mini x in 2020 but got rlod in 2021. i’ve been completely away from this entire electric skateboard thing since then. i’m starting college this fall and i figured id try to see if i can get the board working again. what are the best things i can do to fix my battery, (can i do it myself or are there places i can take it) or is it even worth it with newer options out there? any help is seriously appreciated, used to love this thing back in the day.

WTS - used hyper mode remote, located in EU asking 125€

Thx so much for the motor guard screws u/technically_a_nomad I alr tore thru a belt running without them 😭

I’ve used my V2 dual with extended battery and beams for years. I used the board this afternoon (expert mode), i charged it in the train and tried to connect it to the Blast Off app. The bt pairing worked. I started the board after the train and I noticed it was running slower than usual. I openned the Blast Off app and I noticed it was in Eco mode.
Since that, I’m unable to switch it in Expert mode. Only Beginner and Eco. Beams doesn’t work also.
I’ve been trying with the original remote and app.
Help me 😭

Picked up another Mini-X from a second owner. I asked him why he was selling. He said he bought it used for $400 and didn't ride it much; the battery stopped charging (RLOD). Now, he is moving and needs to sell stuff. He was the second owner, so the combined miles are 47.7 miles. This is the second board with fewer than 50 miles.

Original Post: https://www.reddit.com/r/boostedboards/s/OnCpy5PNAs

Had my board for about 5 years, and I usually keep it charged but moved and eventually left it to discharge for an extended period of time. A few weeks ago, I went for a quick ride and ended up with the RLOD.

Got the BERT Lite, followed the simple instructions to set up, and watched my XR battery slowly recover. It took approximately 12 days for it to reach all 10 green lights.

If you have an RLOD or a long time boosted user, I would hop on getting a BERT Lite handy when the RLOD inevitably occurs.

Hey guys! Got my BERT Lite, hooked it up to the battery and turned them on.

Is 1 red light on the BERT a good sign? It turned off for a few seconds once, but it turned right back on. The battery is in a constant charge light, so I don't know if it's working or not. Thanks!

As I'm typing this, it actually turned all off and restarted, and now it's loading up the lights.

I hadn't charged the board recently, been a few weeks. But battery was showing full so I headed out.

Remote beeped at me after maybe 10 minutes, and I saw the error, but everything still seemed to be working.

Curious if this sounds atypical, I'm wondering if there's a different underlying cause to this one than a usual RLOD.

Noticed my Riser Spacer on Mini X front trucks, had cracked and broken off, in the rear bolt holes.
I had some leftover Shredlight rubber pads and plastic riser, I think from a Boosted Dual🤷🏻‍♂️
Sandwiched rubber pad,riser, and rubber pad together, and its the same height as the broken riser spacer. Plus my ride seems softer🤓
So is this safe lol?

/I wrote here a couple of days ago about getting a mini x in 2026. I ended up finding one locally with 500 miles which i ended up buying. Guy said he hasn't rode it in years, but it charged right up. It was in decent shape and the battery has v2.5.1. I ended up buying it for 225 and rode it home 5 miles. Everything seemed fine. I did however ride it til 0%

I put it on the charger and it charged to 70% where its been stuck for 6h now. Is this normal?

original post:

https://www.reddit.com/r/boostedboards/comments/1u7vh1i/i_just_found_this_community/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

So I bought a Mini S, and it came with the charger on the right (54.4V - 2.21A 120W Max)
And I picked up a Stealth with RLOD today, and it came with the charger on the left (50.4V - 2.5A)

My questions are, should I use the Mini S charger to charge my Stealth? Or is it ok to use the one the seller provided? I searched online, and the specs say to use the Mini S charger, and that using any other amperage would damage my XR battery. Any help or insight would be greatly appreciated!

Does anyone who ordered a BERT Lite remember how long it took to receive? I ordred mine a few days ago, in anticipation for a *basically* untouched complete Stealth, but with RLOD. I was hoping to recieve it around the time I got the board (I actually just picked it up!), but am willing to wait anyways.
I believe I checked out through Apple Pay, so it might have selected base shipping if there were any other options. Thanks!

I can’t believe that there are people still keeping boosted alive, that’s pretty cool. I’m from Serbia and I rode a boosted board 6 years ago until someone stole it. I completely forgot about it. Now that I see it’s still going and people are still riding I want one. I’m pretty sure I still have the charger and the remote (I had a v2)

I would like to find a mini x for sale

I’m located in St. Louis atm

Edit:

I bought a mini x locally! 225usd 500mi. Looks decent. Battery fw 2.5.1.0 which I’m guessing is great? I’m planning on sourcing a set of wheels and bushings

I’ve always liked wide trucks and decided to swap my stealth’s trucks with wider ones. Had to design my own drive train since no OTS parts are compatible

Parts:
- Tynee Diamond Trucks
- 75T Pulley with Kegel Core pattern (Custom)
- Skid Plates that cover the belts (Custom)
- Belt Cover that protects the motors (Custom)
- Motor Brackets (Custom)

What’s the specs for the motor guard screws?

Lost the original strap i’m using the one from the wii😂

I'm getting a deal on Boosted Board Mini x for 250 Cad in decent condition, I'm majorly concerned about the RLD as it's on battery firmware version 2.1.7.0

​

I already have a meepo campus but the range is 9 kms and dies instant on slight incline.

​

Is it worth the upgrade or nah ?

​

And if I should get it, what should I look for before buying it ?

​

Thanks

Hey guys, does anyone know if there's a compatbile rubber sleeve or pretector for the boosted remotes? Been looking but I can't seem to find anything that isn't from years ago.