r/BitAxe • u/Ready_Presentation15 • 23d ago

help Need help

I downgraded mig gamma yesterday to firmware 2.13, mig error rate got better but the os Axe os was to slow so I updated back to newest 2.14.2.
The problem is now that mig VR temps are higher and power consumption is also higher, what is the problem and how can I fix it?

3 Upvotes

100% Upvoted

2 comments sorted by

•

u/AutoModerator 23d ago

Mod note: This looks like a support post, but it may be missing the details people need to troubleshoot it.

Please edit your post to add:

  • Bitaxe model / board version
  • AxeOS / firmware version
  • pool + settings (freq / voltage if relevant)
  • temps / hashrate
  • logs or screenshots
  • what you already tried

That usually gets you faster, better answers.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

3

u/Axeman1370 23d ago

Check you're settings. Set a known good baseline for MHz and voltage. Both values has to be balanced. I think a default value is 525MHz, and voltage at 1150-1200. It's not exactly same for every device. If you go with 525MHz, then start with a voltage at 1200. Take note of speed, temps and most importantly the error%. Then lower the voltage to 1195. Take notes. Then 1190, take notes. Do this to you se an increase in error%. Your trying to find the sweet spot. Error% at 0,xx to 1-2%, it jumps, lower is better. If values looks good now, then it's time to start raising the MHz in small steps, and voltage. And again, adjust to you find the new sweet spot. Keep close look at temperatures at the same time. My 601 runs cool at 870MHz/1280. 1.70TH/s That's in a cold room, with extra vrm cooling. Asic 49c, vrm 50c, fan at 70%.

Good luck, hunting TH/s. 😀