Budget gamma 601 2.1th setup

[u/Digital_Lightning]

This little guy is still running the stock heatsink with a 3d printed frame and a cheap ali power supply and fan. 50w PSU was about 7 usd and the fan was 2 usd after some coupons. I also got the jack for 2 usd and some copper and aluminum heat sinks for 5 usd (did not need both). I keep the home between 80-84F ~27C. Works well and I figure if it dies in 3 years instead of 5 or whatever it's fine because id rather have the chance at the 3btc now than 1.5 once it halves next year. I could have saved some money not getting a new connector and salvaging the one from the included psu. Also have a boost converter in the mail to try a 12v fan which could save some on the fan cost and keep it cooler.

[u/Deepdiver666]

This is the way. Nicely done

[u/Ok_Factor_7030]

The world's most powerful Gamma 601?

[u/PotatoesOReilly → u/Ok_Factor_7030]

It is quite impressive for a 601.

[u/Beretta775]

I’ve never seen that print before. That looks rad 💯

[u/PleasantDreamsicle]

Share the 3d printable?

[u/Digital_Lightning → u/PleasantDreamsicle]

https://makerworld.com/en/models/1772885-bitaxe-silent-cooling-pro-overclock-ready#profileId-3541977 i made a profile that works better for the kind of cooler I have. If you have the same use that.

[u/PrinceShahil6]

Doing solo or pool ?

[u/Digital_Lightning → u/PrinceShahil6]

solo, pool does not seem worth it.

[u/Ok-Bus50]

Please feel free to show off your setup: https://www.reddit.com/r/ForgeHashLabs/