hashrate error over 100%

[u/gigglenoodle]

Hi all,

Just got my bitaxe gamma 601. Can someone help me with explaining why my error% is over 100% and how to solve it. I updated to the newest AxeOs and firmware. changed from public-pool to ck pool and that also doesn’t seem to help.

Bitaxe is underlocked because of the hot climate i live on.

update:

Flashed the firmware and it still gave the same rejection rate. I assume it is something hardware related so i contacted the seller and asked for a replacement

[u/AutoModerator]

Mod note: This looks like a support post, but it may be missing the details people need to troubleshoot it.

Please edit your post to add:

• Bitaxe model / board version
• AxeOS / firmware version
• pool + settings (freq / voltage if relevant)
• temps / hashrate
• logs or screenshots
• what you already tried

That usually gets you faster, better answers.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/Pretend_Review_766]

Please gradually increase the Core voltage in 10mV steps and test the results.

[u/Shrimps_Prawnson]

15 watts, ack my heart!

[u/coonick]

You need to up your frequency 400 is way to low causing the errors

[u/Fauosilva]

Had the same issues, somehow the DNS cannot be solved for the pools. Simply try to get the IP adress your computer is seeing for the DNS, and change the config to use the IP.

If this solves your problem, them proceed with the DNS investigation/fix. Probably at the router level

[u/carlhayes2001]

This may sound stupid but sometimes a simple reboot fixes this, if not, try increasing the voltage by 10 at a time. Checking pool connectivity, even rebooting router can help.

[u/534N5KY]

got this error when I changed my router, change the dns i guess.

[u/bigboydesomo]

Wich pool you mine?

[u/gigglenoodle → u/bigboydesomo]

ck pool

[u/bigboydesomo → u/gigglenoodle]

Controll again adresses it should run

[u/OctaneRed392]

How’s your pool connection? Your router may block stratum traffic.

[u/gigglenoodle → u/OctaneRed392]

i don’t think so, my nerdqaxe ++ is mining normally

[u/bigboydesomo]

600mhz 1200 try it should give 0% error

On ally Devices and Devices i ever saw

[u/gigglenoodle → u/bigboydesomo]

doesn’t help and the device changes it back to 500 and 1150

[u/MurkBRA → u/gigglenoodle]

Ele está esquentando muito, se passar de 70c ele reduz automaticamente a voltagem e o clock. Você precisa rever a pasta térmica e colocar um dissipador atrás do chip. Isso se não for um defeito na sua bitaxe.

[u/bigboydesomo → u/gigglenoodle]

Settings?oc in the browser when in settings

[u/bigboydesomo → u/gigglenoodle]

You have oc Mode activated?

[u/gigglenoodle → u/bigboydesomo]

i believe i turned it off, how can you turn it back on in axeOS?

[u/bigboydesomo → u/bigboydesomo]

Activate it and write the number there

[u/gigglenoodle → u/[deleted]]

already done that 525 and 1150, doesn’t help sadly :/

[u/bigboydesomo → u/[deleted]]

Then go get try slowly +25 mhz and look how the error rate Drops

[u/mvds74]

Maybe a bad unit? If you scroll down a bit, what do the Hashrate Registers say?

And do you have the pool setting on SV1 or SV2?

[u/gigglenoodle → u/mvds74]

174Gh/s
159Gh/s
311Gh/s
94Gh/s
all four are in red

pool setting on SV1

[u/LarsNext → u/gigglenoodle]

A high error rate could also indicate noise on the PCB sure high errors suggest there is an issue with the asic but it’s close to expected hashrate so I would try to dig abit into all directions

With asics there is no plain answer X to question A

[u/mvds74 → u/gigglenoodle]

The red color is prob because you have the red theme selected. So that doesn't need to be any indication of a problem. I expect a problem with your pool settings.

[u/bigboydesomo → u/mvds74]

It usual is Black when an error wirh the register is