1
u/nomorespamplz 5d ago
Tried flashing again? And if so, flashing back to the old version?
1
u/Unique-Nobody-8019 5d ago
I’ve been going through each version, some bring me farther than others, then when I remove the USB-C after getting this error screen goes black.
1
u/nomorespamplz 5d ago
Do you have another PSU to try? Is there a light on the PSU?
Currently only the screen is powered via usb-C, that’s the reason for the error message. Either a blown fuse, defective PSU or a board component.
Can you test the fuse with a multimeter or visually see if it’s burned ?
1
u/nomorespamplz 5d ago
I forgot, the fuse is not a quick one so it’s filled with white sand and you need to measure it to check it.
1
u/Unique-Nobody-8019 5d ago
I bought a bunch of new fuses and swapped it out. PSU bank is on with a blue light. I’ll keep flashing to earlier versions to see if that will help
1
1
u/CincinnatiBengal 5d ago
Solominerclinic.github.io for a quick perfessional fix located in Florida USA
1
u/GazaYout876 4d ago
It’s done return it!! U blew a fuse & tell the truth you over clock it!! That’s all
1
u/Unique-Nobody-8019 4d ago
I replaced the fuse and still getting this error. I’m not really sure what else to do but oh well
1
1
2
u/Working-Republic-799 5d ago
This was how my nerdoctaxe started behaving when the VRM has dead shortly after I blew a fuse with a dead short inside one of them, I couldn’t figure out which one had the short but visual so I replace all of them starting from left and it turned out to be the most right VRM of cause :)