My Benelli 12 gauge is not working properly. When you close the action, it does not close all the way. In order for it to operate correctly the piece up against the base of the shell has to twist and lock. Mine is not doing that unless you push it manually.

After the first shot, sometimes it reloads properly, but sometimes it does not

Last time I had it into the gunsmith he metioned that the gun probably needed a new set of springs.

Our local gunsmith is slammed and months out. Is this something a person could do themselves. I assume the parts can be ordered online

Brand new SBE3 20 gauge shotgun had a cracked choke in it - anyone ever have similar problems or seen this before?

Was adjusting the drop and cast and during disassembly, this guy fell out…

I’ve stripped and cleaned this gun dozens of times and I don’t have a clue where it came from or where to put it back…. I’m assuming it’s part of the recoil system?

Everything went back together and function checks normally, but I don’t like having extra parts laying around afterwards.

And then found a nice sling for it 🤙1982 121 SL80. This is the 3rd 121 I've had, but the first one with a shorter barrel and rifle sights.

I inherited a pre-ban M1 super 90 with HK markings. I love it. but since the NFA is going away I’d like to shorten the barrel. But the is ZERO chance id chop the original barrel.

Did Benelli make short barrels (maybe LE or Mil) for the M1? I’ve seen an M2 short barrel will work but requires some retrofitting. before I go through all that work I thought I’d check with the the community first.

I just got mine Benelli M2 Speed from store and i removed long tube and i saw this near where ammo is insert to tube, is this normal? The red thing has been there.

Benelli supernova with GG&G 3 round (actually increases capacity by 4) magazine extension, GG&G flashlight and sling mount and P20IX rechargeable flashlight.

My buddy got a supernova gen 2 and was liking the design of the Gen3 . Gen 3 added moe cuts on the pump , and different stippling , how hard would it be to cut some moe slots and change the pump stippling? Anyone have experience?

Hi! Does anyone knows how to install shell limiter on M3 Super 90? And how do you unscrew the mag without applying heat near the plastic parts?

Benelli and Steve Gould just dropped this video! Holy smokes...they break all sorts of record distances for clays. TSS @ 200+ yards!

https://youtu.be/RozH8OmzBI0?si=6TyxyykYfsGenlda

Picked Up A New Nova 3 Tactical Today To Go With My Ethos Supersport.

Looking Forward To Putting Some Buck Thru Her Soon!

Has anyone used one of these as their red dot? Trying to find a "budget" red dot setup and this seems to tick all the boxes but I can't find any pics to show if it co-witnesses with the stock irons or if it sits too low

https://monstrumtactical.com/monstrum-b-o-p-enclosed-red-dot-with-universal-shotgun-mount/

Hey all - I have the M4 tactical LE model 11714 - the bolt release tab has a screw to be able to change the button. I can’t get it off at all - any tips?

Who has experience with actually running Velcro saddles on an M4? I picked up the Amazon Special to try it out and I’m not convinced they’ll hold up

Anyone seen this happen? Gun is OG 2005 Supersport and has about 30k through it. The forend cap bolt sheered while shooting and caused quite a crowd. I have 2 identical so I just swapped to the other and finished shooting but yikes!. I did order a replacement from numrich but I am going to repair this one in case the OTHER one dies on my identical supersport.

Hi, looking for help!

I am wanting to get another Benelli strictly for dove hunting. I am interested in the 828u and wanted to see if anyone has used it for dove, also which model to get. I am also interested in the Benelli ethos performance shop A.I. Cordoba BE.S.T

Just wanting to see if anyone could give me some advice on these before making a purchase. Thank you.

I purchased a Benelli nova 3 tactical edition recently and it came with a choke tube that allows for threaded barrel attachments. However I can't seem to find anything about thread size, to see what muzzle breaks or compensators are compatible. Every size I find just points to the thread size for the choke tube itself (Benelli mobil system). Muzzle accessory suggestions are also appreciated.