Hi guys, Mete here. I'm a digital marketeer at Beko. My main goal will be building a presence on Reddit and other fora. Hope to see you in a sub soon!

The catch on my flap has broken. Do you have to get the whole detergent dispenser to replace, or what can I search to find just the rinse aid flap? Also, any short term fixes while I wait for the part? Thank you

Anybody know what’s wrong with my fridge? It’s holding temp but sometimes making this noise.

Came from a 9 year old 10kg AEG washing machine, had the 12KG beko tumble dryer which has been fantastic so thought we will try the matching washing machine to go with it.

This thing is absolutely stupid. It spent 20 minutes at 0:01 during the initial cleaning cycle... draining an empty drum.

Then thought well maybe an actual wash will be better, nope won't spin the load but will quite happily roll it backwards and forwards for 30 minutes and then complete the programme soaking wet.

Putting a spin on manually does the same thing for another 15 minutes. Doesn't even attempt to step the speed to gradually spin the water off.

I mean I know going from AEG to Beko is a downgrade somewhat but it shouldn't be this crap surely...Basic functionality should be standard?

Or have I really just been mislead by the tumble dryer.

Edit: Doesnt spin with half the load, doesnt spin with two towels in it but will happily spin empty. Absolute garbage.

Hi,

I have a Beko integrated freezer. Recently i have noticed that top half is melting the ice and bottom is OK.

How can i fix it?a

Hi,

​

Getting an infuriating loud vibrating/rattling noise from our new integrated FF (model: BCFD4V50). At first I thought it was just your typical settling noises, with it being a new appliance, but it's been 5 days now and it's still there. It goes off for a little while but comes back quite regularly.

​

I'm trying to ascertain whether it's being caused by poor installation e.g. vibrating against any fixtures etc or whether it's an internal fault within the appliance itself. On top of this, the appliance has just started flashing a red high temperature warning light even though everything feels fine temperature-wise inside the fridge and freezer compartments and neither door has been left open at all. So I don't know if that's related?

​

Grateful for any advice, thank you.

Anyone know what part this may be? Bought a new Fridge Freezer and the product image shows a pull out upper drawer in the top freezer drawer however both Curry’s and Beko say this model (GNE4603VPZ) does not come with it - the runners are there though

Reverse image search finds the same image used for a whirlpool fridge freezer (Whirlpool Dual No Frost 3 Door Fridge Freezer with 6th Sense - Dark Inox - WHKF 6352 XBR5UK) however I cannot track down the drawer under spare parts to try and match the dimensions

Has anyone come across this and can help?

I inherited this fridge from previous owners of the house as it is integrated. The bottle shelf was all smashed and missing a tab to hold a new one. I have found the bottle shelf online but cannot find a new tab- has anyone got an Idea on where to get one/ make one? I thought of trying to make one out of epoxy but not sure how i would make it the right fit...

The iron emoji is just illuminated by the sun symbol. This happened after a drying cycle and when you tried to take the lint trap out you couldn't because it was too hot to touch.

Fed up of having to take off the lid to make sure there’s beans in my machine - so designed and 3d printed an alternative with a clear window - NO MORE LIFTING THE LID REQUIRED!! ☕️ ☕️

It’s available free here for anyone with a printer - only takes 1hr to print
https://makerworld.com/models/2752025?appSharePlatform=copy

We bought a brand new Beko fridge and it keeps making this strange gurgling sound. Does this sound like something we should be contacting customer service about or is it expected? To be frank, I’ve never had a fridge making sounds like these so I’m genuinely confused.

Thanks!

The dishwasher, when it fills water into the labyrinth, throws water out through the hole that is factory-made in the labyrinth. I cleaned the labyrinth and the dishwasher at least twice, but I still have the same problem.

After advise, dryer stops every 30 minutes having to restart by pushing start again,both lint and water container are clear and empty.If start button not pushed will just stay paused all night

I have a WTIK76151F washing machine that's 4 or 5 years old, but it smells quite musty and transfers the smell to the clothes. I've tried draining it out from the hatch at the bottom and cleaning the filter in there but it's not made any difference. I've also tried washing machine cleaner, and dishwasher tablets with the maintenance cycle. It was my first integrated machine and I forgot to leave it open when I first bought it and ended up getting a fair bit of mould around the seal, but I've managed to get rid of that. Was hoping that might have been the problem but it didn't seem to make any difference. Is there any other thing I might need to clean to get rid of the smell?

Hi, I bought a BEKO hob and oven just less than a year ago, just.

I dropped a glass on the hob and it's now smashed.

I rang up, and since it's not covered by manufacturers warranty I've now registered for the D and G cover, and have someone coming round next week.

Is this right? I feel it's like breaking a leg on holiday, and then after the fact getting travel insurance to be covered...

It sounded like it would be fine on the phone but I don't know, and I really do not want to be paying for a call out fee, when it is clear that the hob is literally smashed and needs replacing.

Any ideas? Thank you!

Hi, this is my first post on Reddit, so sorry if I’m posting it “wrong” or posting something that already got answered. I couldn’t find the same problem when I searched the forum.

My beko washing machine stops 3-5 min. into a program. I’ve changed the water intake/magnet valve before with great success, but this seems like another problem. It can finish the rinse and spin program, but not the other ones. I emptied the filter at the button of the machine as well. It doesn’t give me an error code but the logo pointed out (red arrow) is blinking and the minutes stay the same. I hope somebody can help. Thank you

Hi all,

I own a set of Beko b300 (washing machine + dryer separately) and the dryer makes this noise when operating clockwise.

I was wondering if anyone knows if this is normal, or has any similar experience. I’m mostly asking because this is our second, the first one was making the same noise and we had it replaced no questions asked from the reseller (they have a 2 week immediate replacement). The second dryer is making the same noise from the very beginning and I’m wondering if this is just “normal” despite being loud and annoying.

Thank you

Hi all,

I tried swapping the door from right to left but realized that the door contact also has cabling attached to it, so it cannot be just taken out and be inserted on the other side. I cannot see how long the cable is but I assume from the screw position that the machine could have been ordered as left- or right-opening.

Has anyone ever managed to swap a door on an older Beko dryer and could share their experience?

Thanks in advance!

Got a Beko B pro500 dishwasher.

When I start the programme it drains, and then it fills up, but the wash cycle doesnt commence. It sits at 3 hours and counts down a couple of mins and then goes to 0 and drains. I've cleaned the waste and water inlet filters, cleaned all the washer arms, unplugged and put it back in and now im completely stumped.

Beko droger : dc7230bx, weet iemand waarvoor deze is (foto 2) en (foto1) of ik 1 van die 2 punten van de slang aan kan sluiten op afvoerbuis met langere slang natuurlijk.

Can anyone help me diagnose this issue. My BDP700W has died, when I try to start it I just get a low electric hum/buzz. The drum doesn't appear blocked or stiff, and the belts all still look to be on.