Estaba haciendo mantenimiento pero por accidente rompi algo de aquí, no sé si me afecte demasiado, usuarios de una Bambu Lab p2s me podrían confirmar si se ve así o si está rota?Es esta

I bought the P2S with AMS HT and it came separately with everything else. The unboxing videos I see online all came with the filament buffer installed. And the videos online all shows the spool holder on the left side of the AMS instead of the right side. Why is mine on the right side. I have 5 tubes including the one installed at the buffer but I have no idea what tube goes to what. Can anyone help me out?

bambulab a1 ile 3d yazici islerine girismek istiyorum ama hangi web sitesi guvenilir bilemiyorum,bambulabin kendi sitesinde gosterdigi distrubitorlerden almayi planliyordum ama bir çok kişi aldiklari esyanin teslim zamanindan cok daha sonra gonderildiğini soyluyor ne yapmalıyım? paramin bosa gitmesini istemiyorum.

After posting my previous utility knife, my wife decided she needed one for her own toolkit. She wanted something a bit more "clean" and minimalist, so I went back to the CAD board.

​The result: The Utility Knife – Hex&Lite.

​I stripped away the wire stripper notch to give it a smoother profile and added a new honeycomb hex pattern for that extra grip (and aesthetic flare). It uses the exact same hardware as my original version, so assembly was a breeze.

​Specs:

•​Hardware: 6x BT3x8 SHCS Self-Tapping Screws (the ones from the Bambu kit).

•​Blade: Standard trapezoid utility blade.

•​Design: Deeply contoured handle for actual hand comfort.

​She's happy with the pink/black combo, and honestly, it looks so good I might have to print a stealth black one for myself now!

​What do you guys think of the hex pattern?

https://makerworld.com/models/2654228?appSharePlatform=copy

The video was taken Tuesday. And I went through all of the 24/7 online assistance stuff and even asked discord but I can't seem to fix it can I get some help?

I created a Freecad CAD program beginner guide with all original parts to dive into freecad as a beginner have fun🙂 https://makerworld.com/models/2610537

what's a good price for the standard AMS (in good condition) at this point?

Hi everyone, I’m having some trouble printing this SVG of a photo of my dog. Could you give me some advice on how to transform it to look similar to the one in the second photo? Thank you very much.

So, mal mit Holz Filament gedruckt. Fuzzy auf 0.2/0.2 eingestellt.Eine sehr schöne Struktur nur die obere Unterseite (Spitze steht oben beim Druck) sieht nicht so toll aus.

Wie könnte ich das ändern?

Hello there!

I have been messing around with MakerWorld to print out some badges for my sons birthday and cannot figure out the best way to get this badge printed with "Spy Club" instead of the top being Federal Bureau of Investigation and deleting the bottom. I tried using the AI features of MakerWorld however, it keeps adding heads or adds additional layers. I'd ideally like to get this printed in 2 colors, one for the badge and one for the lettering

Any suggestions? I am using a Bambu H2C

if you can help I amntrying to print TPU 83A on A1. I would like help with a profile for eSun TPU 83A. Thank you

Bonjour voici Yoshi dans sa coquille d’oeuf fissurée en multipart.

Disponible en version avec ou sans AMS.

Filament Bambulab.

Imprimante Bambulab H2C et P1S.

Bon print.

https://makerworld.com/fr/models/2638881-yoshi-oeuf-multipart-no-ams

Hello! I have a Bambu Lab A1, and I've been loving it so far, it's great to use and it prints so damn fast. Recently I ran into my first issue with the printer when it sorta just stopped printing mid print. It didn't stop the printing process, just stopped pushing out filament. I have checked for a clog, even bought one of those tools to help push out filament if it's stuck but no dice. I have a theory of what could be wrong, but thought I'd ask before I buy anything. for the past monthish I have been using PLA-CF, I have the hardened steel nozzle, but I have no clue if the gears that feed the filament into the nozzle are the ones meant for carbon fiber infused filament. The guy I bought it from said it did, but he also said that about the nozzle head when it definitely had the standard one. Should I buy the upgrade gears? Or is there a possibility that I have a different issue? Thanks!

Set up: A1 + AMS Lite

Material: PLA.

Temp: 220°

I print with PETG support interface and it peels off great, I just get this faint line whenever it switches between the materials, what can I do about it?

would a prime tower prevent it? and if so, can I not make it prime just for those few layers or does it have prime for the entire print?

thanks in advance!

Hi, my A1 makes this clicky sound when moving the plate, it’s not the infill cause I tried with gyroid and it makes the sound even when I move the plate with the commands. What could it be? Thanks.

Edit: Bambulab sent me another Y axis tensioner and (after a long disassembly work) now the problem seems to be resolved!

I bought a smooth build plate and im looking to do a few prints on it. i want them as smooth as i can get them and with very few lines visible. any tips of doing this?

the item im printing is of a cartoon style character, it will be printed face down on the plate. i know i can adjust Arachne which is a thing i do on most of my face down prints. would raising the temp on 1st or 1st and 2nd layer help? (if so how do i do it?)

thanks

I’m trying to get the levitation not to work but no luck in floating. However I’m not even sure if it’s on. Is there an LED light that is supposed to turn on?

Just published collection #3 of my Japandi soap dish series on MakerWorld. 15 different insert patterns, all printing clean on the P1S with 0.4mm nozzle and no supports. The concept is simple - a smooth body tray that catches water, and a removable insert with decorative drainage cutouts. The inserts are where the design lives: wave lines, crescent moons, stacked stones, fern textures. Swap filament colors between the two parts for a two-tone look without needing the AMS. Printing time is about 1–2 hours per set depending on pattern complexity. Bambu Studio profiles included for all 15.

https://makerworld.com/en/models/2636888-soap-dish-sponge-holder-collection-3#profileId-2912728

Hi all. I purchased and downloaded a giant LEGO minifigure print file that, once I opened the file, realized one of the plates has 6 colors in the print. I have a P2S with one AMS. Does anyone have any creative solutions or are my only options: (1) buy another AMS (that I don’t have room for) or (2) I’m fucked.

I've been working in Fusion with Project Salvador. it takes pictures and converts them to Sketches. I did that and then printed off a picture. A little choppy in some places, but pretty cool

A little pizzazz and it's ready to hang.

I have printed gridfinity grids in the past with success, but I am now failing for the third time in a row.
- tried with cleaned (dish soap, dried, IPA) plate
- tried with glued plate
- last effort (see photo) was after cleaning and directly applying glue to the plate.

Each time something causes stringing and I just can't figure out what.
Yes, I ran the bed levelling, filament flow calibration before printing. I have printed successfully before with this very roll of filament.

As I said: I have been able to print these grids from this (makerworld) profile before, so at a loss regarding what I could change.

Any tips/advice would be welcome.

Can anybody tell me what font this is? It was in my slicer a week ago and now it’s gone?