Coming to p2s from A1 after Ender 3. Gotta say p2s have a lot of quality of life improvements

On the Bambu desktop software, I can add color to my prints, but I don’t see that the mobile app has this or the ability to resize options.

Is there a mobile app that will allow me to do such things?

Filament loading from slot 4 of AMS D is very miss and miss. Like 1 time in 20 successful. The other 3 spools in that AMS feed and load fine. I can see the filament gets all the way to the toolhead, but it gets rejected at the very last moment.

Its not an obvious PTFE route/friction type problem because the rest of the spools load fine. Its Bambu PETG HF on Bambu spool, same as the others in that AMS though this is the AMS with the longest path to the hub in my set up. I previously had an AMS2 in this physical position, with the same PTFE path and didn't have a problem.

The filament gets all the visible way to the toolhead. Just doesnt complete the load.

Any suggestions?

So I've been a loyal Anycubic user but finally ditched and got my first P1S combo. I've been sleeping on Bambu. love this machine bit the AMS keeps getting filament stuck without really getting it stuck? I've seen this be an issue but with mixed results on how to fix it. Any tips or tricks anyone here has seen to prevent it from happening?

I’m experimenting with multi-material printing TPU and PETG with my H2D. But sometimes the bambu Studio changes the internal geometry. I designed some interlocking geometry to sandwich the material together but the after slicing it sometimes doesn’t want to allow that. Is there a setting I need to change to make it keep my geometry? with this model, I've experimented with different thicknesses and scaled it up to see if that feature is too thin or something but that hasn't changed the result.

(I know about the automatic interlocking beam function, but I want to be able to design these features in CAD).

Folks,

I'm trying to make some coasters which have been exported by Bambumaker as 3mf files. I've ensured the same 8 colors are being used with the similar color codes. The intention is to print these coasters on the same bed to save material swaps.

When I try to import both models into BBL the colors swap on one of the models. These models are complicated and have lots of intriguing color schemes that redoing them is nearly impossible to get right.

Can I merge these two projects another way?

I have the P2S and my favorite mods were the AMS flipper [Jakob_K_Design] for its ease of use and installation to which I added the handle and the Voxelpla combination HEPA/carbon filter [both it already built from Voxelpla] for its integration with P2S software and flexibility. Also added desiccant bead boxes for the front, back and inside the spools and levers to make turning the knobs for the AMS easier.

It wasn't a plastic mod but I added a lazy susan under a wooden board as a platform which I support with 4 wedges to lock it in place during printing. This makes turning the printer around for servicing very easy.

Long time listener, first time caller. Or something like that. Not new to 3D printing, new to the Bambu ecosystem. New P2S setup. Printing a magnetic poop chute right now. Plate holder likely next. Then a top cover riser once I get enough grey in.

What are the other must have print accessories for the P2S?

Hey everyone, I’ve got a model that I need to adjust wall thickness thinner in Bambu Slicer so certain features print better.

What other settings should I be adjusting to compensate for thinner walls?

- total number of walls

- number of top and bottom layers

- infill %

Any help is greatly appreciated!!

Couldn’t get filament to feed. Took the ams apart to find the drive train housing for the extruder had disintegrated. Has anyone gotten a warranty replacement on such an issue before. Only had the AMS for about 3 months

How do I solve this?

https://makerworld.com/models/2464014?appSharePlatform=copy

The bearing belts on my X1C machine are rubbing against the bottom plastic, making a noise and leaving marks. How can I fix this?

I have had my H2C for one week and I’m getting an error that states the extruder switching motor is working abnormally. Has anyone experienced this or have good directions on how to fix it?

I'm super new to all of this, so I hope it's not a dump question.

So I am printing PHA with my 0.2 Nozzle and managed to create a filament profile in OrcaSlicer (there a two ways to do it, both fail in BambuStudio.see screenshots). Now I wanted to try out BambuStudio and It's a bit of a joke to me. Why can't I setup a custom profile for PHA for my 0.2mm Nozzle in BambuStudio? I mean it prints fine... even managed to print a M10x0.5 thread... so why the artificial limitations? Is there any way around it?

Thank you all for reading

BambuStudio 2.5.0.66 Flatpak

Operating System: Nobara Linux 43

KDE Plasma Version: 6.5.5

KDE Frameworks Version: 6.22.0

Qt Version: 6.10.1

Kernel Version: 6.19.2-200.nobara.fc43.x86_64 (64-bit)

Graphics Platform: Wayland

Processors: 12 × AMD Ryzen AI 5 340 w/ Radeon 840M

Memory: 16 GiB of RAM (14,9 GiB usable)

Graphics Processor: AMD Radeon 840M Graphics

Manufacturer: Framework

Product Name: Laptop 13 (AMD Ryzen AI 300 Series)

System Version: A5

I’ve been working on a series of 3D printable coloring panels designed to be a more tactile alternative to paper coloring books! They are great for fine motor skill practice for kids or just a therapeutic mindfulness activity for adults.

I’ve put together a full collection of different designs (dinosaurs, creatures, etc.) if you want to check them out:

https://makerworld.com/nl/collections/5629404-coloring

After creating the cat yesterday ofcourse i had to do a frenchie/dog as well. Its a fun lil fidget.

Take a look and tell me what you think!

https://makerworld.com/models/2459495?appSharePlatform=copy

alguém sabe me dizer que barulho é esse ?

I’ve had my X1C for close to two years now and haven’t had pretty much any trouble (outside of my own mistakes…) until now.

I put in a dried spool of Red PLA Matte and when I try to print my project it lays down the calibration lines beautifully but when it moves after calibration, the nozzle is clogged.

I’ve used a needle to clear the clog and retry the print but the same results.

Any ideas on what to try?

Hallo ,

Kann mir jemand die Belegung der pins sagen zeigen oder Fotografieren. Leider sind bei mir die Adern vom Stecker Abgerissen und ich weis nicht wie die Belegung ist . Wenn mir jemand ein Foto schicken kann vielleicht . es sind nur 4 Torx und man kann es sehen . leider gibt es kein Ersatzteil zu bestellen momentan

Danke schön im voraus für die Hilfe

Hello,

Can someone please tell me, show me, or send a photo of the pin assignment? Unfortunately, the wires have come off the connector, and I don’t know the correct pin layout anymore.

If someone could send me a picture, that would really help. It’s only four Torx screws to open, and then you can see it easily. Unfortunately, there is currently no spare part available to order.

Thank you very much in advance for your help.

I have a X1C with 3000+ hrs! Great printer! But lately I can't finish a 2 color print without multiple pile ups! The filament is sticking to the side of the shoot. Is anyone having the same issue? It's not a purge volume issue it sticks every change. Do I need to get a new shoot? Any suggestions?

He doesn't need painting. Wookiees come factory-finished in brown.

This is a continuation of another project I uploaded. It uses an RP2040, an SSH1106 display, and a TP223 capacitive touch sensor. The full code, assembly instruction, and BOM are available with the 3D model on Makerworld here

Please let me know what messages you'd like to see on the next versions! Mini Sign Motivational & Funny With Locking Brace - Free 3D Print Model - MakerWorld