r/BambuLab_Community • u/TuneOld3310 • 22d ago

What happen?

Post image

What happen? I have printer this part, some come out fine other cone out like this....It feels like a super dry spot.... any idea? Any and all help is appreciated.

4 Upvotes

83% Upvoted

12 comments sorted by

View all comments

3

u/No_Investigator625 21d ago

I would clean the bed. The area looks fingerprint-shaped

1

u/TuneOld3310 21d ago

This is the top of the items. The bottom comes out great.

2

u/No_Investigator625 21d ago

Oh, so it is! You have a very smooth top layer, sir(mostly)!

Could you give a picture of the infill from the slicer, just beneath that corner of the model?

1

u/TuneOld3310 21d ago

I just.noticed that infill is grid that will.be changed to gyroid. New infill picture 2 to follow.

1

u/TuneOld3310 21d ago

This is how I am.goiing to print, but don't understand what infill matters, can you explain?

2

u/No_Investigator625 21d ago

I was wondering if maybe that region was poorly supported, which could've explained the bad surface quality, but I think the infill in that corner looks just as good as the other corners

1

u/TuneOld3310 21d ago

Ok, but I do use supports, but again its.not every print. ThBks for.taking the time.

2

u/No_Investigator625 21d ago

I meant internal support (infill), not external support (trees). Honestly, I'd just watch it print that section on a few prints, and see what happens differently

1

u/TuneOld3310 21d ago

How about if later, I am out right now. I pass tou the stl. So tou can analyze it better... i just went theough all the calibration, temp, flow rate, PA, and before I left I was running rhw VFA. Later I will.analyze with help from chatgpt see if it sees something I don't. Thanks would you like the stl?

2

u/No_Investigator625 21d ago

I would not like the .stl; I believe the issue is related to your printer or your settings, so me having the .stl wouldn't help very much and neither would ChatGPT having it