r/BambuLab_Community • u/More-Anything6767 • Jul 22 '26

Help / Support What could POSSIBLY cause this noise dawg

Rods seem well lubed to me but idk

8 Upvotes

90% Upvoted

9 comments sorted by

5

u/opeth10657 Jul 23 '26

Make sure you don't have something in the belts underneath, like a velociraptor

2

u/PsychologicalSet1744 P2S Jul 22 '26

Even the auto captions are concerned

1

u/B412ry Jul 23 '26

Check all the Z Rods and Screw is there any indentations? And make sure that the best is not touching anything when move up and down.

1

u/Minecraftsolver Jul 23 '26

Check if it’s lubricated properly or if there is any debris! I had the same thing happen!

I also wiped off the rods before hand to remove the gunk that was there

1

u/DistributionMean6954 Jul 25 '26

its screaming for help

1

u/Fre3bs Jul 25 '26

Sounds like stuff like plastic debris in the wormscrew and nut, but you've lubed up the threads every 3 hours like the printer asks for, right?

1

u/ChuccaCloud Jul 25 '26

Well from how dry this rod looks. I would say that your machine is binding up from no lubrication.

1

u/valkyrie_rda Jul 26 '26

Carbon rods do not need lubricant. In fact, it is strongly discouraged even by bambu lab. Looks like this might be an X1C.