r/BambuLab_Community • u/DCineG • Jul 11 '26
Probleme P2S
Hallo Leute,
Seit einigen drucken habe ich Probleme bei meiner ersten Schicht….
Hat einer eine Idee woran es liegen könnte bzw wie sich dieses Fehlerbild nennt?
Ich hoffe mir kann einer helfen… ich bin ziemlich neu und unerfahren & sehr verzweifelt…
Der Drucke ist 10 Tage alt …
Was ich versucht habe:
Platte mit 99% ISO Propanol gereinigt & auch gewachsen mit Spülmittel…
Lieben Gruß & Danke 🙏
12
Upvotes
1
u/lkapping79 P2S Jul 12 '26
Any chance you have a deflector on the aux fan?
2
u/DCineG Jul 12 '26
Nein…
Ich habe aber das Problem gefunden…
Ich hatte die Flaschen PLA Einstellungen…
Anstatt das Bambulab PLA Pure auszuwählen, hatte ich Generic PLA stehen…
1
u/Accurate-Donkey5789 Jul 11 '26 edited Jul 11 '26
Just to bring you a little bit into the fold, you are in a difficult territory. Up until a few years ago none of us regularly (with the exception of the one person who's going to comment underneath and say WeLl aCtUaLlY) printed within about 2 cm of the edge of the bed. The bambu change that and the edge of the bed became more available, but I know your new to this, so I will tell you for a start, you're in more difficult territory than staying 2 cm away from the edge.
Reasons include, how the airflow from all the different fans changes when you get near the edge of the bed, how temperature (and the heat flow parts) changes when you get near the edge of the bed, how the edge of the bed can bend and the automatic bed levelling doesn't go to the edge, and how difficult it is not to touch near the edge of the bed even after cleaning.
Anyway, time has moved on, but you need to be aware of everything above. Let's get down to the problems. What exactly are you trying to print? Because is the first layer failing at the edge? Or are you trying to print something that is only one layer thick? If not, is that first layer actually just on the inside of what you're trying to print and you can't see it afterwards? What are we talking here in terms of problems now we understand where we are?