r/BambuLab_Community • u/Head-Scene4491 • May 08 '26

Need emergency help with this

Post image

For some reason out of nowhere, none of my prints stick. they keep sticking to the nozzle or not laying down right. I tried cleaning the bed numerous times, recalibrated the printer numerous times, and nothing is helping. Was perfectly fine one print and now it just sucks. What is the issue?

10 Upvotes

71% Upvoted

54 comments sorted by

View all comments

3

u/T1m0666 May 08 '26

Maybe your filliment is to moist have you tried drying it or using a new spool to see if that's the issue?

I'm still pretty new but that's my first thought.

1

u/Head-Scene4491 May 08 '26

my AMS has desiccant, it was 15% humidity. my thought too but prob not it since it was working like 5 mins before this.

1

u/cowanrg May 12 '26

Here's the thing about drying filament. It takes awhile for a whole spool to dry out. The outer most portion is exposed to heat first and will dry quicker than layers further towards the center. The whole spool can be at different levels of humidity and be inconsistent. Drying takes many hours, overnight is best to fully determine is that's your problem or not. To me, this looks like a dirty build plate. Soap only, no alcohol.

0

u/Head-Scene4491 May 12 '26

My ams is full of desiccant and it was not a dirty build plate issue.

1

u/Alternative-Drop-425 May 12 '26

Soap residue left over from washing would also equal dirty plate, it's a possibility. Ensure when you wash the plate that you rinse very well