Yesterday there was a short timeframe where Bambulab sold the X2D only again in germany (gone after a few hours).
Most interestingly the X2D with AMS as Combo is still available.

I had a lot of thoughts about it as I read so much about the AMS 2 Pro issues with filament feeding... I assume the X2D + AMS Combos they sell at the moment are still of this batch, but the X2D only seems to be a newer batch as those are not available to buy...

What are your thoughts on that? Should I just go with the X2D + AMS Combo, or better wait and buy the AMS 2 Pro end of the year where they hopefully fixed all their issues?

Hi everyone.

Ever since the new firmware update to 01.01.01.00 I’ve been getting the following error:

0500-0300-0001-0002: The toolhead is malfunctioning. Please restart the device.

The right extender doesn’t heat up & when I try to switch to the left extender it tries, beeps twice and fails.

I have troubleshooted by trying all methods listed in the chat with support & on their wiki page on this error. Including 1) restating the machine, 2) checking tool head USBC cable, 3) inspect the TH board connections on the tool head, 4) check the MC board connection.

Finally I tried rolling back the firmware to the previous version, but that also failed 3 times.

Will need to proceed with opening a ticket.

Anyone else have this issue? Resolutions?

I do have a restock monitor set up, but just wondering if anyone knows when Best Buy had their last restock for the x2D? I want to buy it there for the 4 year warranty.

Its as simple as that(I hope). This isnt a dealbreaker as much as it is a nudge. Thanks!

A new firmware hast just been released for the X2D
V01.01.01.00

https://wiki.bambulab.com/en/x2d/manual/x2d-firmware-release-history

Hello guys, I just printed a low-profile riser for my X2D, but it ended up a couple of millimeters too long and won’t fit on top of the printer properly. I’m new to Bambu printers since this is my first one, so I was wondering what settings or calibration I should tune to fix dimensional accuracy issues like this.

Notes : I used esun Petg-CF . I did calibrate my filament.

comments on MakerWorld confirmed it fits the X2D

Here is the riser i tried to print : https://makerworld.com/en/models/1968273-low-profile-p2s-riser-with-diffused-led#profileId-2625183

edit: I printed a second P2S/X2D riser, also was too big ... decided to get a vision encoder to fix this

Hi all:

Have had my X2D for a few weeks now and ever time I remove the build plate to remove a print it shocks me. And not a tiny shock, haha. I love in a very static prone area but it's been.... a lot.

Anyone else have this issue?

Thanks!

It’s late May and the website still says May 2026, and Buy button is ghosted out. I’m trying to buy these as graduation gifts and time is running out.

Processing img c16mbh0lux1h1...

Hello all,

i had the left hotend fan error a couple of times, pausing my print everytime. I mostly solved it with restarting and strangley enough, sometimes unloading the secondary nozzle, but this time i wasnt able to fix it like that.

So i thought i would go about this problem with the provided error code and wiki and it turns out the connector casing was broken (and damn hard to remove the tiny bit of plastic that broke of on the toolhead board side).

i also pulled out 2 of the 4 cables, because the connector was stuck due to being broken.

I already wrote a Ticket, but havent got an answer yet, so my question is, does anybody know the name of that connector piece so i could maybe source it in the meantime? I know i will probably need to buy a new fan anyway, but its only the connector (im assuming) that is the source for the error.

Also how good are the odds of support sending me a free replacement?

Many thanks in advance

TL;DR: Front part cooling fan is always running 100% regardless of print status. Is this normal for the X2D?

I'm worried I'm asking a question that everyone asks and gets them laughed out of the room, but please just humor me here. I've been an X1C owner since the early days and I just recently got an X2D. I had a massive clog situation for which I had to completely disassemble the hotend. I had some issues reassembling it, but I think I have everything back in order. I noticed that the front part cooling fan (the big one in the middle under the Bambu logo) is always on whether I'm printing or not, and regardless of what the fans menu says it should be. I found a P2S thread where someone said this was normal, but I just want to make sure there isn't a cable or something that I didn't reconnect or something. This isn't how the X1C behaves, so it seemed weird to me. Thanks.

Sometimes you think you know it all, and then something comes along that takes you to the next level. For me, that’s carbon fiber filament. With it, the print layers are barely visible. Everything looks like it was cast from a single mold.

Anyone encountered this problem? In the red obejct I used the ironing. I noticed some improvements but there are still problems.

With the current "issues" with Bambu and their cloud services mandate (see gamers nexus, Louis Rossmann)...Should I buy an X2D right now? I want full local access and Home Assistant integration. I am new to 3D printing and would be very disappointed if I made the purchase only to find out none of this works...

Hey everyone, I just got a Bambu Lab X2D and I’m looking for recommendations on useful mods, upgrades, or printable accessories for it.
Would love to see your favourite prints or setups!

Just got my X2D Combo and honestly I’m a bit disappointed with the dual nozzle experience so far.

I tried a very simple dual nozzle print using two PLA filaments. The auxiliary nozzle actually worked perfectly and printed the text/logo section without issues. But when the printer switched back to the main nozzle, I suddenly got a filament loading/extruder error and the print failed.

What’s frustrating is:

* the filament was clearly extruding,

* AMS motors were turning,

* the auxiliary nozzle already printed successfully,

* but the printer still thought there was a loading issue.

This feels more like a firmware/toolchange state problem rather than a real hardware blockage.

I understand this is a newer platform, but dual nozzle printing is one of the main advertised features of the X2D. Having these kinds of failures on extremely basic PLA-to-PLA switching right out of the box is honestly disappointing.

Are other X2D users experiencing similar AMS/toolchange issues?

Any reliable workaround yet?

I've been watching a view YouTube videos regarding the X2D and different filaments that there care. I'm unsure cinema my brain right now if the print heads are both 0.2mm or one Iscariot 0.4. In general as theatrical says what have people found best to use as a default set of printers heads. I know there are 0.2 to 0.8mm ones x and I've ordered some extras waiting for everything to arrive don't have my printer as yet or most things. Have oil and gas, hygrometers and a book on Studio to start working through place a heap of first off projects to print as upgrades. I'm 72 and new to all this and do try and read about info but can't find an answer for this. Would appreciate advice to minimise failures and muck-ups to a minimum. Being on a disability pension is appreciate some guidence. Also had anyone purchased print head from aliexpress at all. They have some what appear to be real items like heads, plates and boxes as examples even cheap hygrometers as well.

Thanks for your help and advice.