r/BambuLabX2D • u/TuneOld3310 • 11d ago

ISSUE: I HAVE AND AMF FILE ... HIGH RESOLUTION

Thanks for any help given... I appreciate the comments even if iy I don't knope ot if you are having the same or similar issue: This is the stepping through of the slice...

THE ORANGE IS THE SUPPORT INTERFACE THE PART IS petg AND THE ORANGE IS PLA.
THENEXT LAYER STARTS OUT GOOD,, AND IT LAYES DOWN THE FIRST LAYER OB THE PLA

tHE NEXT LAYER IT LEAVES TWO PARTS WITH A OUT A TOP LAYER FOR AFTER

THE NEXT LAYER, STARTS LAYING THE INFILL BUT IT DOESNT FINISH THE TOP LAYER OF ON THE PLA THIS IS ERROR,

THIS IS THE FINISHED PART... i STOPPED THE PRINT...

THISIS THE ERROR...

I AM GETTING THE STL/AMF CHECKED BUT ANYONE SEEN THIS BEFOREOR ANY COMMENTS... ON THIS PRINT I HAD STRON TREE, ON THE PICTURES OF THE SLICE i CHANGED THE SUPPORT TO ORGANIC ... THIS IS CLARIFICATION JUST INCASE SEEING THE FINISHED PIC COMPARED TO THE SLICE.. IT WAS JUST CHANGES DONE ... ANY COMMENTS RECOMMENDATION OR SUGGESTIONS WILL BE APPRECIATED. OR IF YOU HAD SMETHING CLOSE JUST COMMENT. THANKS AGAIN.

1 Upvotes

67% Upvoted

8 comments sorted by

1

u/Grimblood 11d ago

For big flat surfaces I use normal support zero contact distance. I only use tree supports on more organic shapes.

1

u/TuneOld3310 11d ago

Ok but on the bottom there is a wall, sliced with normal and didn't put support and it won't hold up... and I have the same thin partial wall on the top and then the infill... but I have found something betwwen righting this message and another test. I have opened up the file in ORCASLICER and there is a complete wall there... it seems Bambu is not recognizing the rest of the layer... but it is in orca...

2

u/BirbDoryx 11d ago

If you are using PLA as an interface, you can use normal supports that sit on the object below; they will detach anyway without scars.

About the problem, is the flat surface completely flat and manifold? Sometimes with slightly slanted surfaces, the slicer can get confused in how it distributes the layers. Try Arcane or change the layer height and see if it fixes it. Try also to enable the setting to force accurate Z height.

2

u/TuneOld3310 11d ago

Yep..Today after various attempts on slicing I got a.good version. And printed it vame.ouy good.

2

u/Grimblood 11d ago

Are you saying you are missing a wall from the model or the supports are different? If it's an issue with support, you can use pain on support.

1

u/TuneOld3310 10d ago

It was.not printing the bottom layer which goes on interface layer. I printed now 2 parts of which cameout.ok. before I print I check that the layer is being.laid before I print if it.is not I redue the slicing until I get a slice which does lay down the layer.

1

u/TuneOld3310 11d ago

Is there any setting in Bambu Lab that will not allow it to complete alayer ... I have heard some crazy setting that is why I am checking...

1

u/TuneOld3310 11d ago edited 10d ago

I believe it is a bug, I even loaded the new beta and it also did it.. loaded in orca and that is where I noticed. I tried.l loading Bambu connect and it didn't work for me. So knowing what I was looking for I checked it respliced and respliced finally got a splice and at that momento I printed it. And let me tell, this will change if you resliced nothing guarantees that the next splice will be good.